|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
Okay everybody, Here's an update on my speakers. I had them stored for a Year because of a larger Room renovation project, and it turns out I didn't remember their technical Data too well... ;-) The speakers are IQ junior 300, nominal 100watts, max 160watts with a frequency range from 30-25000 Hz Nothing really totally highend HiFi at all, but
-
Hi Steffen, Sounds good! My main speakers are stored away right now so I cannot supply all data immediately. I will post it later...maybe you or somebody else will be able to judge from that data. Thanks a lot so far, Ray
-
Hi Forum, I have a setup around a Beomaster 3000 receiver and want to connect 2 speakers with around 20w each to output set B and 2 speakers with around 40w each to output set A. I feel that this might drain to much power from the amp (though I hardly every pump up the volume to party level). So I thought about leading the output from the Beomaster
-
yes that is the lock I mentioned.
-
Hi Peter, I read again through what BeoTech supplies on this topic. No visual Feedback would be okay for me. But I guess I get you right that all Beolink converters only convert between ML and MCL signals? And MCL signal isn't the same as MCL30 signal? Yours, Ray
-
Hey, COOL! You've got mail, Stoney. Ray
-
I completely agree with Graham, FIRST store away the stylus safely, then try to run any old record to force the deck to recognise size and accordingly speed. I did not understand a part of your post where you said that "second as it seems locked with some plastic lever"?!? Can you actually see something jamming the gears? And (hope you checked
-
Ahoi Stefan, genau den Link aus der BeoTech http://www.beoworld.org/beotech/mcl/mcl30ppi-01.htm hatte ich auch schon gelesen...und daraus geschlossen, daß ich über eine MCL30 – wie dort geschrieben – alle Funktionen des BM 3000 über das dazugehörige Terminal auch aus einem anderen Raum bedienen kann. Soweit wäre
-
Hi Peter, so it IS a link system? And I CAN control BM3000 (and the attached BEOGRAM and BEOCORD) from another room (or corner of a room ;-))? Thats what I thought. Oneway-Control means remotely controlling the BM 3000 not vice versa, right? So there is no converter from early MLC30 to MLC2? Yours, Ray
-
Hi there, does anyone here has something like a partsbox from some vintage BeoMasters which were scraped? I would need some tiny stuff for my Beomaster 3000 http://beoworld.org/prod_details.asp?pid=339 , to be precise the cap for the infrared eye (or was there never one? Looks a bit trashed on my BM, lots of gap next to the actual eye) and some of the
|
|
|