[quote user="Dillen"] Probably bad belts (available). Can you hear the motor running if you place your ear to the Beocord ? Martin [/quote] Yes I can hear the motor running. Have you got belts in stock Martin?

I have a Beosystem 3300 which has been put away for some time. When I connected it again the other day I experienced a few problems. CD player didn't read the cds. Problem solved to some extent. Lid didn't open. Problem not solved, but I have an idea how to solve the problem. Next problem was the Beocord. When I touch the PLAY button it lights

[quote user="Ville Laustela"] Also cleaning-cds can be bought. [/quote] I've heard many bad things about cleaning cds. Even heard that they can damage the lens, so I have never tried one. Can this be true? /riis

I have a Beogram CD 3300 which I haven't been using for some time. The other day I tried it and it had the same two errors mentioned in this thread, - lid doesn't open properly and cd just spins with display showing a "?" As this thread is an old one I would like to ask: Did you solve your problems? If yes, how? Other good advice to

Hej Kaspus Måske kan du bruge dette her http://www.beoworld.org/beotech/mclconn2.htm /riis

Thanks Chris, now I understand. /riis

[quote user="Medogsfat"] Like Mika I also use the battery method the centre the coil, and ALWAYS start by gluing the inner ring to the cone or you'll never get them centred properly. Find a glass tumbler or similar which will sit inside the inner ring of the surround to weight it down to the cone until the glue sets. Chris. [/quote] I

[quote user="casdave"] They come off from the front. Use a wallpaper scraper or wide putty knife to get in behind them. [/quote] I did it! I followed your advice and used a putty knife. The front was mounted with glue and double adhesive tape. This cannot be the way it came out of the factory. On the other hand, the front had no plastic spikes

Nobody?

I can't wait for spring to come. Where I live we have had snow since December 16. Haven't touched a golf club since that day......