Suddenly it works. I have not done anything - at least what I know of. The only thing I have done is that I set the modulator option to "on" once more. It seem like even if you just open the link frequency menu on the TV it the RF amplifier is turned off. Then set it to "on" again and DO NOT open to check. The only problems now in

I live in Malmö in Sweden. The Dilog DT 655 HD support Text Tv with the original remote. And yes there is a function on GO+7. This the DVR (access to recordings). GO+5 is favorites. Here are the BEO4 command overview:

How is it possible to active TEXT for channels received via a set top box? I have a Dilog DT-655 HD and Beovision 8-32. The TEXT on Beo4 does nothing when watching channels from the box. And there is not command for this i the overlay menu.

Sweden does also use DVB-T2 for HD channels. B&O confirms that they are working on a solution, but they cannot give a release date.

Does B&O support DVB-T2 for Beovision 8-40? (Yes I know that the DVB-T standard is supported)

It seems like it is only tracks bought in Itunes store but only some. Hi, I have a problem with a crackling noise in the left channel on my BV 8-32 (internal speakers) sometimes when I play N.Music. I have the following setup: 1 new iMac 27" connected to a Beoport via the headphone jack. 1 Beovision 8-32 1 Beosound 3000 1 Beolink passiv with two

I think I soon will give up. I use a DTV on a Beo4 to activate the mainroom BV8-32 from the link. This works fine. The TV turns on (green light). I try to change the frequence to 450 as suggested. I tuned in a analogue channel i EyeTV to 450,25 mHz and suddenly I got a signal. Now everything looked almost fine. The quality was not the best. Then I tried

I have now tried with no success. I have installed a Bang & Olufsen RF Link amplifier. Så the setup is now now. The aerial is connected directly to the RF link amplifier. RF out from the BV 8-32 to the "mod in" on the RF amplifier. The digital settop box to tap 2 on the RF link amplifier. The link room is connect to tap3. In the

I have probably found something. In Settings where you also can change the link frequency you can also activate the RF modulator. It is by defualt set to auto, but if you do no use a Bevisio TV in the link room the modulator will not be activated automatically. I have not tested this yet.

Hi, Active Antenna is something else. This is used to send 5 volt power to an external antenna amplifier. The power is then send out to the antenne in socket.