Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Search

Page 2 of 11 (109 items) < Previous 1 2 3 4 5 Next > ... Last »
  • Re: Beosystem 6500 white

    Also think that the original boxes is also treated like a gem in secondhand sell, I personally would pay more with them. Cheers Jesper Sweden
    Posted to BeoWorld North America (Forum) by MoglesMac on 01-31-2011
  • Re: BeoLab Penta1 Stupid Question from Newbie

    Hi Lefty11 Its easy to like the Penta´s :D If you dont want to use a Bang-amp (first choice with 4-pin special DIN as seen on pic above) then I would use Line INPUT from your pre-amp/line out connection on your amp. There will be no info on displays tho but personally I think that is the best way. The Tape-door shouldnt be that hard to fix, should
    Posted to General Forum (Forum) by MoglesMac on 01-29-2011
  • Re: BeoMaster 7000 kit opinions, please.

    Am also a big fan of Beosystem 7000 (Beomaster/Beogram/Beocord and BeogramCD) and love them, I would go for a repair. Im not at all a pro on electronics BUT i would start checking if the Beomaster isnt already "converted" for 110Volt ( i suspect that you are in USA). I personally have no knowledge on this but have seen talk about converting
    Posted to General Forum (Forum) by MoglesMac on 12-14-2010
  • Re: B&O Beogram CD 4500 Datalink

    Also really check that the 7-pin DIN cable from CD have really have all 7 pins in it. You can unscrew the "last" two on in order to make the cable fit a standard DIN -> RCA converter. If its a new CD the prevous owner might have had it connected to a "non-Bang-reciver". Cheers Jesper Sweden
    Posted to General Forum (Forum) by MoglesMac on 11-28-2010
  • Re: Beomaster 5000 & Beolab Penta

    Hi, Im not at all a pro on BM5000 (1983-86 i suspect that this is the one) but I dont think this have Speakerlink-connection (4-pin DIN). If its the BM i think of I should try run the Pentas via Pre-AMP wich is 2x RCA-cables. I also think it should work to run it via "normal 2-pin DIN but i find that more problematic (I never got it working 100
    Posted to Vintage Products (Forum) by MoglesMac on 11-07-2010
  • Re: Beogram CD 5500

    Hello David, There will be no compatibility issues at all between the two CD-players. Both are pretty much the same inside (however on the tech side I think there is two diffrent versions of 5500 CD inside). But for use on a Beomaster 5500 there will be no diffrence in use. There will be a slight diffent outside look of the 6500 since it has polished
    Posted to General Forum (Forum) by MoglesMac on 10-21-2010
  • Re: Beogram 1202 Pickup Arm Downstroke question

    Yea, the nuts are accessable from downunder. I took of platter and tightend the transportscrews. Then turned the beogram over and unscrew the black bottomplate. When removing bottomplate take care of the "wheel" that adjust smaller speedvariates. Inside there you will see the nuts very fast. I also hade problems with downstroke at 33 rpm.
    Posted to BeoGram (Forum) by MoglesMac on 10-17-2010
  • Re: Beolink 7000 keeps switching on and off

    My "bad" BL7000 still works all fine in charger but to be honest I dont use it that much since i have a "good" BL7000 that is my joy :). One downside with the "bad" BL7000 that im abit worried that I never "execise" the battery in the same fashion I do with my "good", since the "bad" mostly
    Posted to The Workbench (Forum) by MoglesMac on 09-16-2010
  • Re: Beocenter 9300 cd fault

    Hi Im no prob on BC9300 but it seems to have same problem with dead capacitors as my Beogram 7000, this is just one of the threads about that: http://forum.beoworld.org/forums/p/12146/90048.aspx#90048 I cant tell you tho IF this is really your problem tho... hope any other can tell you more... Cheers Jesper Sweden
    Posted to The Workbench (Forum) by MoglesMac on 09-08-2010
  • Re: Beomaster 4500, Beogram 4500 and Penta 1 weirdness

    Hi, Im no pro on Beosystem 4500 but I have a Beomaster 7000 wich is pretty near connectionwise :P. Just make sure that the speakers are connected too the Speaker 1 connections and not Speaker 2. The mute-function will not effect Speaker 2 at all. On Penta1 issue, do you have them connected via "speakerlink" (4-pins special DIN) or with "normal"
    Posted to The Workbench (Forum) by MoglesMac on 08-12-2010
Page 2 of 11 (109 items) < Previous 1 2 3 4 5 Next > ... Last »