Hej Stefan, Jag vet inte om jag helt förstår din fråga men om det är vilken form av KNX Telegram/Datapoint type du ska använda till att styra KNX Dimmaktorn så är det typ "3 bit controlled". Med denna kan du sedan sätta ett value 0-15 där 1-7 sänker ljusstyrkan och 9-15 ökar ljusstyrkan

Hej Sikora, Jag har en MLGW och en KNX installation som är uppe och jag kan förhoppningsvis hjälpa dig. Föreslår att du tar direkt kontakt via PM. Mvh Rolf

The long awaited 2-way enabling software for the Beo6 has just been released by B&O (version 2.11a) and it is available via a new Config Tool software version. Enjoy this new exciting functionallity for the BS/BM5 and BS5 Encore ! //Rolf

The long awaited 2-way enabling software for the Beo6 has just been released by B&O (version 2.11a) and it is available via a new Config Tool software version. Enjoy this new exciting functionallity for the BS/BM5 and BS5 Encore ! //Rolf

These are the symptoms when trying to start the Config tool in a 64bit version of Windows 7 which is (still) not supported by B&O. The easiest workaround is to use the XP Virtual PC options within Windows 7 and install the Config tool within this shell. This works well although it is a little hassle to remember to connect to the BEO5 USB post within

Hej Roger, Jag tror att enda lösningen till detta är just AST där varje högtalare kan få en ny roll i de olika "scen" uppsättningarna. Jag gjorde en uppgradering av min BS3 med den nya AST modulen utan större problem. //Rolf

After some further testing I think that I have found the solution I was looking for. The actual macro commands can be seen in the following screenshot. Rows 1 and 2 set the correct light settings Rows 3 and 4 are for those of you that have an AST Speaker setup, Function_1 equals "Preset 1" from the BEO5/6 and is typically the first AST Listening

The problem with this solution is that in many cases it is impossible to know what the actual volume level is before adjusting it up or down in a number of steps. The only way would be to turn the device off and on and base the settings on the default audio volume setting. This might be the last resort but hopefully somebody has some ideas.

Hello all, I am looking for a way to enable a couple of Scenes triggered from my MLGW consisting of both lighting and sound. One scene would be for example "Dinner Party" where the lighting is set according to the Dinner Table and the background music is set at a slightly lower level. A second example scene would be "Party" where

I would suggest to turn OFF and On the AudioMaster setting. With the AM option set to OFF the BM5/BS5 should not accept the CD/RADIO setting any longer and this might clear up the internal database. Good Luck //Rolf