|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
Um die Beosound 3000 Link-Raum fähig zu machen, benötigt man eine Software-Version 3.0 oder höher. Bei alten Beosound 3000 (mit Seriennummern kleiner 15955832) reicht es anscheinend nicht nur das EPROM mit der Software auszutauschen, sondern man muss zusätzlich irgend etwas austauschen. Meine Fragen: - Hat jemand von Euch so etwas
-
I have a Beosound 3000 with serial no. 1554xxxx, currently on sw 2.0. Is it possible to upgrade it to Software 3,1 (I would like to move my Beosound 3000 to a link room therefore I need Option 6)? Or is there a limit by 2,12? Besides the Software Update do I have to change other parts of the Beosound 3000 (like CD interface)? Thank you for your help
-
-
I am thinking of buying a ZP90 player. But how to connect the Beolab 4000 to the ZP90? How do you turn on the Beolab 4000? Is the ZP90 able to send out the signal?
-
I am using a L5 Remote Dongle to turn my iPhone into a universal remote (see http://www.l5remote.com/ ). It is working fine with my Bang&Olufsen equipment. Unfortunately the L5 can not learn Beolink 4 commands by itself, but you can programm the L5 with pronto hex codes. I found some pronto hex codes of Beolink 4 commands at http://www.remotecentral
-
Zu Fragen 2 bis 4 habe ich nun selbst eine Lösung gefunden, nachdem ich die letzten 2 Tage mit der Beosystem3 / Mac Mini gespielt habe. Frage 1 und 5 bleiben offen, falls jemand eine Antwort dazu hat, wäre es klasse. Für die, die es interessiert: Ich habe im Service-Menü (Menü --> 0 0 Go --> "Monitor" -->
-
I) Ich habe einen iPod/iPhone Dock via Apple AV-Kabel (Composite-Video) an meine Beosystem 3 Anschluss AV4 angeschlossen. Zusätzlich habe ein IR Kabel vor das Dock gelegt und in der PUC Liste "Apple Universal Dock" ausgewählt. Das klappt super, nun kann ich entweder Musik hören (Bildschirm bleibt schwarz) oder sogar die Videos
-
Als ich vor vielen Jahren meinen MX8000 gekauft habe, mußte ich das Modul für den Masterlink Anschluss extra zahlen. Erkennen tut man das daran, dass an der Rückseite ein Masterlink Anschluss vorhanden ist. Ansonsten ist an dieser Stelle eine Plastikklappe. Der MX8000 soll einen anderen Anschluss für die Motorsteuerung haben als
-
Unfortnately it does not work in both situations: (1) connected to the beomaster (2) stand alone
-
Nach längerem Suchen habe ich folgenden Thread gefunden: http://forum.beoworld.org/forums/p/16744/124316.aspx#124316 Danach scheint die Beosound 3000 erst ab Software Version 3.1 Link-Room fähig zu sein. Weiß jemand was solch ein Update kostet bzw. ob man überhaupt bei B&O noch ein Update (neues EPROM) kaufen kann?
|
|
|