Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
Zowel de kleine als de grote afstemwiel werken als een soort spanningsregelaar/instelspanning. Ik zou beginnen met kijken of er daadwerkelijk een verbinding met de antenne is, dus geen draadbreuk of brakke antenneconnector. Daarna zou ik beginnen met de voeding te controleren op juiste spanningen. Ook dit apparaat zal de nodige lekkende elco's kunnen
-
What more do you need? As you already know, it is a 12 V DC , 5A supply. Center of the jacket is positive, and the outer ring the negative.
-
I let you know. Steel wool opens up the structure of the wooden cabinet. First use a piece of glass to take of the upper layer with dirt etc. Then use the steel wool and oil together to rub the oil in the structure.
-
I've used it for the BM1001 cabinet. That worked great. But I didn't use it for aluminum. For the next BM900K is will use a different oil (also from HG), but then I also will use some steal wool. Don't know if that's the correct spelling.
-
-
Maakt het uit of je de voorkeuzekanalen gebruikt of het dialwieltje? Ben bang dat dit een verdere onderzoek vergt. Het kunnen ouderdomsverschijnselen zijn, maar ook gewoon ewn defecte afstempotmeter. Dat afstemmen op apeldoorn, blijft hij daarop staan? Of kun je daar ook echt op afstemmen?
-
Time is a important factor, take your time with refoaming. But that's something you already know I've done a set of CX's 2 weeks ago. And the result was positive despite that I'm not a real supporter of refoaming. The tolerance is close to zero when it comes to the cone.
-
Did you do this before? I'm slightly frightened if spraying the paint fails. It's not mine.
-
You've lost me here. Did you use the control jack on the back of the DVD1. The only use for that is for software updates. The only way the mx commands the DVD1 is by scart. On pin 8. So try another scart cable? a fully wired. Or is it the same as used with the avant?
-
@ Leslie, Did you use rubber instead of foamrings? It's a know fact that rubber lasts longer, but sounds different.