Hi David Do your BV 8 have a DVB-HD module, and have you recently updatet this? The reason i ask is because i have recently updatet my BV 7-40 dvbhd module and am sudenly experiencing something similar ( at least i think so) /Ehlerz

I have allready looked, still seems a bit confusing to me though. Reading all of your other posts on the subject you recommend the Lintronic so i guess this is the only way to go. I am not very techwise so I would prefer somthing that works more or less out of the box. I ONLY need the On/off feature of the projector as the screen is RF controlled. Because

I see, but on the back of one of the plates on the rear of my tv it says under "Control" One output called "TTL" one output called "RS232" and one output called "PUC 1+2". So, what is with the RS232? /Ehlers

Hi Stefan Thanks for your reply. What exactly do you mean by " You cannot connect a projektor to BV7 via RS232. The 9 pin connector ón the back of your BV7 is a cinema out control for third party products"? That is exactly what i would like to do, have cinema control over a third party product, say JVC X30! I do not want an ekstra box

Hi All I need some updated info on B&O directly supported projectors. In other words, what projectors can i connect directly with RS232 to my beovision 7-40 MK V and have the BV power up the projector when choosing format 0. I know this is supported on some of the older projectors SIM2 etc. However do B&O not update this functionallity to also

Hi I have tried this a couple of times as well. I does sometimes work to cut the power to the Master, however sometimes i have had to cut the power to all my masterlinked products simultaniously (easiest done by cutting the power to my appartment). This has helped everytime, as the ML hickup can exist anywhere in the ML setup. Hope it helps. Ehlerz

Hej Peter Når vi nu snakker projektore så har jeg lige et spørgsmål jeg håber du kan hjælpe mig med. Jeg har kig på en JVC X30 projektor og har allerede et BV7-40 MK V. Jeg vil gerne, at min projektor starter op når jeg vælger Format 0 men hvordan opnår jeg bedst dette? Skal jeg bruge cinemacontrol

[quote user="jvezina"] I have a BV7-40 MKIII and it is possible to view side by side two digital sources connected using HDMI. The only limitation is that it is not possible to view side by side sources connected to HDMI input combinations A vs B or C vs D. Other combinations such as A vs C or B vs D are possible. The reason is that inputs

[quote user="Kokomo"] PiP is either a useful feature to you or it's not irrespective of so-called 'digital days'. I can't see whether the signal is digital or analogue has anything whatsoever to the the usefulness or otherwise of the feature. [/quote] Sorry but i dont understand the above. The feature works with analog inputs

[quote user="henrik"][quote user="Kokomo"]PiP is either a useful feature to you or it's not irrespective of so-called 'digital days'. I can't see whether the signal is digital or analogue has anything whatsoever to the the usefulness or otherwise of the feature.[/quote] The problem in the digital era is that most