Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Search

Page 1 of 2 (11 items) 1 2 Next >
  • Re: Beo4 Reduced IR Performance

    Many thanks for your reply, being technical myself it sounds that with the service manual and some spare time this is something I can take on myself. Back to the original question, how much will it cost for the PCB (I assume that this is what will need to be replaced) and what it the part number? I dont know if this helps but the sticker with the barcode
    Posted to General Forum (Forum) by DaveL on 01-06-2011
  • Beo4 Reduced IR Performance

    Hi I have a Beo4 which has recently had reduced performance meaning that I have to point it at the TV for it to send a signal. I have never had to point a Beo4 in my life! I changed the batteries but that did not help so I had a look at the IR bulbs at the front with a digital camera and it revealed that only one of the two bulbs is working hence I
    Posted to General Forum (Forum) by DaveL on 01-04-2011
  • Re: BeoVision 6/BeoCenter 6 Question

    Opman Thanks for your reply. It is such a shame that this has been discontinued. I would have thought that it would be easy to make a TV like a PC so you can swap different tuners in an out as the technlogy moves on with different broadcast formats. Surely the main tuner could be like the optional ones to suit individual requirements. May be we may
    Posted to General Forum (Forum) by DaveL on 08-10-2009
  • BeoVision 6/BeoCenter 6 Question

    Not posted on here for a long time but I would be grateful if any one has any information on the following. I notice that the BeoCenter 6 is no longer listed on the Bang & Olufsen website. I had hoped in the near future to purchase one once it had a Digital TV tuner as standard and opt for the DAB Radio Module too. So can anyone tell me when we
    Posted to General Forum (Forum) by DaveL on 08-09-2009
  • Re: New intelligent lightdimmer for B&O remotes

    I have looked at the user guide and makes mention of low energy bulbs, but can it be programmed like the LC2 for specific use for this so it only works in the on/off mode? I could see no reference to this in the operation section of the guide. DaveL
    Posted to General Forum (Forum) by DaveL on 03-16-2008
  • Re: Beo5 Standby Button Programming

    Thankyou both for input, its a shame the the standby button can't be reprogrammed though. Ian, what codes have you put in for your new 'OFF' button? Another question I have is can you programme it to return to the previous menu page once you have selected something? Thanks DaveL
    Posted to The Beo5 & Beo6 Remote Forum (Forum) by DaveL on 02-16-2008
  • Beo5 Standby Button Programming

    Hi I have been into the dealers this morning to do some changes to my Beo5. I am fortunate that they let me do what I want on my own on their computer. However, is it possible to reprogramme the Standby button so that on a long press it turns of Audio, Video and Light (via LC2's) in a similar way to the A8 Keyring? I tried to do it this morning
    Posted to The Beo5 & Beo6 Remote Forum (Forum) by DaveL on 02-16-2008
  • Re: Retrofit BeoVision 3 32" RF Modulator

    Keith/Craig Thanks for the further advice and information, it is most appreciated. Using the information you have given me I will get them to have a propper look into it for me, they may not have know what the long part number is in order to find/order it off the online parts system. Perhaps pop in next week if I have time. Regards DaveL
    Posted to General Forum (Forum) by DaveL on 01-27-2008
  • Re: Retrofit BeoVision 3 32" RF Modulator

    Keith Many thanks for your helpfull responce, I will see if I can get the parts I require from other sources if I have no luck again with my local dealer. Some times it appears I know more than them on some technical issues! Does anyone have any idea on what it should cost and if it is an easy job to do by myself. i.e does it just plug in and away you
    Posted to General Forum (Forum) by DaveL on 01-25-2008
  • Retrofit BeoVision 3 32" RF Modulator

    Hi I am looking into the possibility of retrofittign a RF Modulator into a 32" BeoVision 3 as I have just picked up a good second hand MX4002. I asked my local dealer about it and he said the parts required were no longer available. Probably wants me to buy a new TV! I find this quite hard to believe as it has not been out of production for that
    Posted to General Forum (Forum) by DaveL on 01-25-2008
Page 1 of 2 (11 items) 1 2 Next >