A straightforward question could have many answers, all being correct. I have recently acquired an Ouverture which is connected to a MX7000. In order to obtain full functionality, since the MX 7000 do not have Masterlink, I have a Beolink Converter between the two: Ouverture --- Masterlink Cable --- Beolink Converter --- 7-pin DIN cable --- MX7000 In

Just tried. The covers did not open with the Beo4 nor the BL1000 when pressing CD or Amem/Atape. If, however I pressed CD on the remotes after having put a CD in the player, the door closed before playing the CD. I have my BC9500 connected to an Avant with the Avant in Option 2 and the BC9500 in Option 0. Sverre

Jeg har en mistanke om at det bare virker på TV-inngangen. Får ikke slått av billedet på min Avant 32 DVD når jeg bruker satellittmotakerens (Nokia etellerannet) radiokanaler. Sverre

Hello Derek, Thank you for the reply and advice. I have the linear pick up. I assume you are referring to the thread "CD Compatibility Beosound 4000 / Overture", and the symptoms are sismilar to those you describes. Did you notice the <> sign in the display when it was broken? Was the operation to replace the laser difficult? Sverre

Hello, Recently I got a bargain on a mint Ouverture and MX7000, Everything is working but the two things mentioned in the heading. The CD spins just under two turns and stops. When it stops, the display shows "CD <>". I tried the test service program for the CD section. I can see no laser light (through a piece of paper) when making

Takk skal dere ha begge to. Spørs om ikke HDR-løsningen er den som gir størst fleksibilitet ift framtidige behov. Sverre

Roger: Siste om IC chip er ila desember , men det virker ikke som om B&O helt tror på det selv - dermed snakker vi om tidlig 2008 i praksis. Og det er synd, for spesielt med Beo5 er styringen av PVR-boksen elegant: På den trykkfølsomme skjermen til Beo5 har du valgene "Record", Text", "GET Guide", "Mitt

talisman: Does anybody know; If B&O plans to SOON uppgrade The DVB-S/T module In BeoSystem 3 white MPEG4 deccoding capability I did ask B&O during a wednesday chat session a long time ago (last fall sometime). Their short answer at that point in time was that no upgrade was planned. It might be of value to raise the question again since DVB

Thank you Keith, Very informative and interresting post. One additional piece of information for the benefit of Norwegian and Estonian Avant-owners: The module is designed for MPEG2 decoding, only, and will not be of any use in Norway, Estonia and other nations with the MPEG4 decoding technology. No version capable of MPEG4 decoding is, AFAIK, planned

Thank you, I'll stick to my 9500 with the converter and save the money for a more prosperous addition to my system. Sverre