|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
[quote user="glug"] The BV5 does not have the BL9 in its menu of compatible speakers, probably due to its age? Is there an upgrade to the BV5 to allow the use of BL9 or should BL9 be used with BL1 or BL5 selected from the menu? Many thanks. G [/quote] There isn't an upgrade to have BeoLab 9's in the menu, but the B&O recommendation
-
Another thought......if you have unplugged the speakers and re-plugged them in to beosystem 3, they will not always take the same position in the speaker allocation menu. so you might find that if you re-allocate them in the menu and reset their roles, all will be fine.
-
[quote user="raveny"] These BL5 are little divas... I had to move them because the floor was oil impregnated. Now I plugged them in and nothing. The LED goes green if I am in the sound menu but no signal noise. Switch back to CD or TV, LEDs are red. Replugged on BS3, L.OPT 0... what else can I do? Thank you [/quote] I can't remember the
-
[quote user="moxxey"] [quote user="meandmyshadow"] And as for the BeoVision 9, 16K must be including the Beo5 at £500 (which isnt much of a consolation), but i bet there are a few dealers out there ready to do deals on ex-display stock, Lee even has one on his site at a good price. [/quote] No, it doesn't include the Beo5
-
[quote user="Seanie"]apparently the drive is like £860 ish and two hours reccomended fitting in a workshop.[/quote] £860 seems a little on the high side i'm sure i heard it was less than that, but anyway, how much were they charging for labour to get it over £1000 £70 per hour? My view on this is, how much does
-
-
-
-
The problem is likely to be that you have plugged the power to the TV before plugging in the stand, so the TV has not recognised the stand. Remove the mains from the TV, remove the stand connection, make sure you have the connector the correct way round because it is possible to insert it upside down if you force it, connect the stand and then connect
-
[quote user="Keith Saunders"] Richard, The latest STB-C western European version is 4.11 Version 4.01 supports the following Humax products:- HUMAX Cl-51 OOC HUMAX CI8100PVR HUMAX DTI-41 00 HUMAX F1-VACI HUMAX HDCI-2000 Humax IPVR 9200C HUMAX PR-HD1000 HUMAX PVR 9200T Version 4.11 supports the following Humax products:- HUMAX Cl-51 OOC Humax
|
|
|