Search

Page 1 of 4 (38 items) 1 2 3 4 Next >
  • Re: Beosound 9000 - CD Error 2

    Hi I also have the same problem. Mine is type 2561,is it MK2? If so,just like to know what model is the CD mech? Is it 1205? Thank you.
    Posted to General Forum (Forum) by 850volan on 09-20-2011
  • Beolab 4000 not coming out of standby

    Hi! I've got a pair of BL4000 which was working fine and recently one of them just didn't wake up from standby. When i turned on the BS9000, one of them was working but the other just stayed in standby. I tried daisy chain the powerlink to the nonworking one first ,then to the good one. Still the nonworking one is on standby but the good one
    Posted to General Forum (Forum) by 850volan on 12-06-2010
  • Re: Beolab 4000 not coming out of standby

    Thanks for prompt reply I'm in Thailand. I just felt that it is a slight problem that can be easily fixed. I succesfully replaced the CD mech on Ouverture. and i think this could be another venture. But if all of you say it's too difficult for DIY. I will take it to the dealer. Thank you for the comments.
    Posted to General Forum (Forum) by 850volan on 04-23-2010
  • Beolab 4000 not coming out of standby

    Hi! I have a pair of BL4000. When i turned on the system. One of them just didn't come out of standby. The red light didn't turn to green. I haven't used them for a while and when i come to. It just happened. I saw a listing on ebay saying, 01 PCB MAIN SWITCH 663X Original part number 8006148 Could this be the part ? Can i do it myself.
    Posted to General Forum (Forum) by 850volan on 04-23-2010
  • Beolab 3000 with Beolab 2

    Hi all! I just wonder if it's ok to put Beolab 3000 panel speakers with Beolab2 ? Would there be any compatablity issues? Any idea? Thanks
    Posted to General Forum (Forum) by 850volan on 04-19-2010
  • Re: Some help or advice please

    Hi! Mine got the same problem. I removed the glass panel and cleaned the sticky goo with sonax(universal lubricant similar to WD40 but not confirmed) and stick the glass back to the plastic frame using transparent resin base epoxy (resin+hardener). This way,it will never fall again. I successfully did this on my Beomaster 3500,Beomaster 4500 ,Beocenter
    Posted to General Forum (Forum) by 850volan on 04-02-2010
  • Re: Age of ouverture and also door closure adjustment

    HI! My Ouverture also have a bigger than normal gap between doors. I've been wanting to fix that but i'm just afraid i would make it worse. I would really appriciate if you can show me how to do it and i'm sure there are lots of people with the same problems. Regards Volan
    Posted to General Forum (Forum) by 850volan on 12-01-2008
  • Re: beocom 1401

    Hi ! I also have the exaxt same problem with the 1401's cord severed near the handset. Could anyone tell me how to get the handset apart so i can rewire it? It's just too beautiful to throw away. Thank you.
    Posted to General Forum (Forum) by 850volan on 10-20-2008
  • Re: beocenter 8500 cd not reading.

    Thank you for all replies. After taking it to service center,the engineer turned it on and it just worked!! I was trying to play CD on it for days and when in front of engineer it just started working and it has been playing normally since then. Maybe it's scared to be gutted or maybe it was shaken up into place during the trip to the service center
    Posted to General Forum (Forum) by 850volan on 08-31-2008
  • Re: beocom 2 not ringing

    Hi again Keith! I tried to connect as you said. As there are 4 wires ,2 for power and two for phone line. If i connect 2 phone lines to pin 2&5(originally they were connected to pin 1&2) , where is the other wire to go to pin 3 in the master socket? I'm a bit dumb about this. Please clarify if possible. Thank you.
    Posted to General Forum (Forum) by 850volan on 08-22-2008
Page 1 of 4 (38 items) 1 2 3 4 Next >
Need a cable? Just ask Steve at Sounds Heavenly Need a cable? Just ask Steve at Sounds Heavenly Need a cable? Just ask Steve at Sounds Heavenly
Beoworld Security Certificate

SSL