|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
Een mogelijke oplossing zou zijn om de laatste CODECS manueel te installeren.
-
Bon, comme personne ne reponds, j'essaye ... Si mes souvenirs sont bons, les SCART AV1 et AV2 sont bi-directionels, donc ce qui veut dire qu'il y a aussi une sortie son sur ces SCART (en stereo analogique gauche + droite). Il te faut donc un câble SCART --> Cinch (rouge et blanc) que tu branches sur l'ampli. Attention, il te faut
-
Hi Martin, I won't be able to answer all your questions, but here are some of my findings: 1. Correct, and you'll only see the menu when you select a source that's connected to the Beosystem 2. This also means that the menu won't show up if you select a HD source that is directly connected to the Beovision 4 (e.x. the DTV/DVI or STB
-
La mise à jour se fait par un technicien B&O. Il faut une nouvelle puce dans le BS2 (et il faut donc démonter le BS2). En même temps il fait les adaptations dans le menu service.
-
Dans le passé, j'avais aussi une BS2 (Type 9414 je pense). Pour passer en HD, il fallait en plus du port DVI (sur le BV4) faire une mise à jour du software du BS2 (SW 16.2 avait été installé à l'époque). Dans le menu de service du BS2, le 2 ports DVI ont été assigné. Après
-
Looks ok, except for the 'Home' button. It has been wrongly assigned. Currently assigned to: http://forum.beoworld.org Should be: http://forum.beoworld.org/ forums/default.aspx
-
Hi Simon, If I remember well regarding the digital inputs on the BeoSystem2, input1 is linked to the AV-connector and input2 to the V-Tape connector. I don't think you can change this.
-
Hi Terry, Had the same problem as you described. B&O serviced it and replaced the PCB which is driving the motor for switching from CD1 to 6. Hope this helps ...
-
I don't think there's a standard 5m Y-cable available from b&o. You can use a 5m stereo cable with on one end a male stereo plug and on the other end a female one (available in specialised AV stores).
-
De bediening van de PS3 werkt via BlueTooth, dus normaal gezien moet er nog een IR ontvanger tussen. Zelf gebruik ik de Nyko BluWave. Dit is een USB -> IR stick die in één van de USB poorten van de PS3 past. De Beo5 kan rechtstreeks de Nyko BluWave bedienen (de juiste template vind je op de site van Keith) of via de PUC bediend worden
|
|
|