Hi, I have a MLGW to test this weekend :-) I'm trying to configure it but i experience some problems : this is the config : living : BV9(option2) + BS9000(option0)+ Beosound5 + BL9 + BL 3 (connected to BS3 kitchen, bathroom, garden : BL passive office : BL active bedroom : BL 3500 I created an xml file for the beo5 which i used to configure the

thanks ! , but i found another way to detect it. pin 1 of the powerlink connector for the center speaker will go to 2,5 V when the TV is on. This way i can detect only when the TV is on and not when the radio is on because this speaker is only used in a TV setup. nico

Hi, Is there a trigger to detect the BV9 is turned on? I want to connect it to a domitic system. A switched output is ok, whatever voltage Is the "DTV Data" connection on the BS3 sending data ? I can do it by measuring the used power, but a direct connected status should be easier ... nico

I had to do a system recovery + update and now it works fine nico

wat betreft vermogen kan dit inderdaad kloppen dat het totale opgenomen vermogen maar 10 Watt is. (typical) Ik vind dat het nu juist B&O is die NIET met cijfertjes aan het jongleren is... Ik zie bij B&O geen muziekvermogens vermelden voor luidsprekers of voor een scherm contrast ratio's die totaal uit hun contect getrokken zijn. B&O

I use CoverScout for Mac, This works very fast. I share the music folder on the mac and let Coverscout do the work. It reads all albums and then you can ask it to find covers on the net I have 2500 full albums on the system and was able to find cover art for most of the albums. Most of them had already a cover, but is was not always the best resolution

Hi, i looked in the service menu but could not find any place to grey it out ... Where can oy gery-out the dvd player ? nico

Stefan, the AV5 connection is greyed-out on my ststrem . So i cannot select hdmi for that port ... Can you select an hdmi port for AV5 ? nico

My BV9 has been upgraded to the latest soft version, but my problem remains the same. I think there is a difference between BV9 setup and another system based on the BS3. The AV5 connection is fixed for PC and you can not change it. This is because normally you can build the BS5 in the BV9. The BS3 sees it is part of the setup of a BV9 and he "reserves"

well, you are using a PC ... this is one of the features of Microsoft's OS. You need to reinstal everything every 6 months or so to keep it stable ... I guess there is some conflicting software on your PC with beoplayer. Are you running windows 7 , XP vista ? I have the impression windows 7 is more stable,