|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
Page 1 of 1 (8 items)
-
Now this is bloody wierd the first thing i swoped with the good speaker were the displays and they both definatly worked with the good speaker. I swoped the base's over and only the good speakers base powerd BOTH displays. So after some rewiring and continuity checks i put everything back together but still no display in the 1 speaker. ive now swoped
-
right ive had it apart again, checked all coninuity from the 6pin display plug to the base and all wiring is good. Ive got 12v at pins 2 & 3 and traced them back to the transformer to confirm, still nothing...
-
that was looking promising as the cables had been squashed abit so i rewired the damaged parts. The problem is definatly somewhere in the base as i swoped it over with the good one. Ive put a link in to make doubley sure its not the fuses, swopped the front circuit board (with the swithes) still nothing. Checked the audio/video switch has continuity
-
if i ignor the display not working everything works exactly as it should. the display (2 x cicuit boards) are good as i swaped them with the good speaker and it works as it should. I sort of ruled out the cable as i used a brand new one after the fault happend, but then even new ones can be faulty, so i will swop with the known good one. But if this
-
i've left the speakers unplugged for a couple of hours, unplugged the ouverture for 10 mins, plugged back int overture then both speakers and still no display on one speaker.
-
i my case it just never came back on. Any one else thinking sticky relay??
-
no theyre only connected to the ouverture. im thinking that its a faulty relay, maybe got stuk on which is why the display stayed on and now wont work to activate the display??
-
HI all I have a pair of penta 3 speakers and an ouverture. last night i turned the ouverture off, both speakers auto turned off, LED's went red but 1 of the displays on a speaker froze and stayed on. The only way i could get it to turn off was to unplug the speaker, but now the display on that speaker doesnt work at all. I havent moved anything
Page 1 of 1 (8 items)
|
|
|