|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
Never mind. Misread the question.
-
The newest software for all BV10 and BV8-40 is B224. Don't know about the Beo5
-
Regarding your question of the 7-55s picture quality over the 10-46, i would say there is quite an improvement from the 10-46 MKI to 7-55 MKII. Especially the black-level the panels produce, this is of course do to the 10-46 having Edge LED and the 7-55 having local dimming in sections of the screen. The 7-55 MKII panel can also produce more light.
-
Oh, my fault. Don't know why i thought it was a BV8-40. Then i'm not shure of the setup options in the menus. My bad
-
When entering the "Sound" menu, go to "Sound Setup" and then "Speaker Type". Now you can use arrow left/right to choose your front speakers. If you select "Speaker" on the BEO4, yes, the screen shows the current speaker option and now you can press "1", "2" and "3" on the BEO4 to
-
Sure that everything it set up right ind the "Sound" menu under "Speaker type"? When listening to music you should go for Speaker 2, as there is no center channel in ordinary stereo music, but the DSP puts alot of energy into the center channel in Speaker 3, because that is how movie sound is mixed. So.. Speaker 2 for music and Speaker
-
All you need is a cable that goes from mini-jack (goes in you Airport Express) to powerlink (goes to your BL3s). You can buy this cable at any B&O dealer. Then you just switch the BL3s to "line" on the buttom of the speaker and start enjoying your music
-
The delay will be about 0,000003ms if i have done my math right. In others words, you will experience absolutely no delay
-
[quote user="Daniel"] [quote user="Karel Uyttendaele"] You can however wirelessly stream directly from your iPhone/iPad to the Beolit without using your home wifi.. [/quote] Bluetooth? WiFi? [/quote] I will also like to know how this is done. I have just gone thru the manual of the BeoLit 12 and i can't seem to find any ways
-
I will not excactly recommend doing this at home, but here is something that might help you: To align the doors, remove the back of the BS3000. In the top and bottom there are 4 screws holding the wire (2 each side). If the doors are closed, they will be pretty close to eachother. Do not screw them all the way out, just loosen them. Start with either
|
|
|