|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
Sorry, I didn't mean it like that...I think it is a great idea. Where do you source the velcro stuff? Thanks!
-
Because this would be too easy
-
Just wanted to give a quick update on my progress: I put everything back together. Here a shot of the installed recapped crossover with terminals in the back. I put the terminal in a location covering the original cable feedthrough so I would not have a hole to plug in the back wall: One note regarding using a hole saw on the back panel: The side walls
-
mine say Type 6263 on the back...I am waiting for the terminals...more after the weekend
-
Are you sure you read the second one correctly? Mine looked exactly like yours. From left to right (on your pic) I had 5uF, 12uF (25V), 75 uF, 25uF, 75uF. I replaced them with 4.7, 12, 68+6.8, 22+2.2, 68+6.8.
-
The dent in the tube only goes about 3 mm down....do you think this is really a problem? Seems really hard "party operation" would be necessary to cause scraping...I tried to bend the dent back out, but the material is quite elastic, and I was afraid I might distort the overall shape of the tube...
-
I thought I would post an update about my 3702 project: I basically followed Soren's advice. First I removed the old foams as good as I could and cut off the dust caps: The next step was to glue on the new foams (I used the ebay store Soren recommended - very fast and nice quality). Here it was important to not put too much glue on the foam. One
-
Yes that is another 'party' for me, too...recapping the humming 3000-2...
-
I ordered everything...I will report back about my experiences with this project. I hope you will get your parts soon! Rudy
-
Got it. With regard to glue, is the sticky glue you mentioned "Aleene's Original Tacky Glue"? Seems there are a variety of Aleene's out there. On a different note, can you recommend a good source for the capacitors in the crossovers? Thanks!
|
|
|