Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
Hi George. I would suggest looking here http://soundsheavenly.co.uk/default.htm . They can make one for you. Tom
-
Hi fishta. I have a similar problem with a BV10 40. Thie issue I have is with the Sky HD box. All was working for about 1 year then suddenly the PUC stopped working about 30 minutes after the TV was switched on. The Sky remote worked perfectly when the PUC was not working. If the TV is turned off and then switched on again about 20 minutes later, the
-
I have a Beovision 10 40" with a Sony BlueRay and a Sky HD box connected and controlled by the beo5 remote control. All has been working perfectly for almost a year now but controlling the SKY box has become erratic. The remote continues to operate the BlueRay and the basic functions of the TV but there is no response when trying to control the
-
Thanks Graham. I will get a silicone spray.
-
Could anybody offer some advice. I have a Beosound 3000 that the doors stick when trying to close, they get about half shut and need a bit of assistance to close fully. They have no problem in opening. Any advice on cleaning or maintenance would be appreciated. Thanks in advance
-
Good afternoon Dan. I had a similar problem a couple of years ago, the solution was to replace the batteries in the handset. I hope this helps. Regards Tom
-
Thanks mika, I will try that later today. Regards Tom
-
Can anybody suggest what to check. I have a BeoVision 10 and a BeoSound 3000 in the lounge and a BeoVision 6 in the bedroom all linked together by Masterlink. Yesterday there was a power cut during the day, when I got home the power was back on. Turning on the BV10 was OK and the BS3000 was a bit slow to respond to the remote control but did respond
-
I just checked the connections on the HDR2 and it has a scart lead and a Set Top Box controller. My configuration was: Sky coax into Sky Box Scart from Sky box to HDR1/2, TV Ariel coax into HDR1/2 Coax from Sky out to HDR1/2 in Scart from HRD1/2 out to Scart on Avant. STB lead from HDR1/2 to IR sensor on the front of the Sky box. This configuration
-
Hi Ben. I used to have an Avant 28 DVD and had a Sky box connected via a HDR1 using a scart leads from Sky box to HDR1 and HDR1 to Avant. The HDR1 would allow you to control the Sky box via a PUC connection. You can connect the Sky box to the Avant using a scart lead but as the Avant does not have a PUC, you would have to change channels on the Sky