After a approx 10 nice hours, this wonderful radio is again back in service, after maybe more than 50 years break. The original tubes are installed and the filter capacitor is changed to the original Hunts electrolytic 2x24uF (with two modern capacitor build in). Several contacts are cleaned, and a number of caps replaced. There are still some work

Rudy, it is nice to do some restoration again which I haven`t done for years. Martin, when I had a closer look at the radio, I can see that the filter cap should be a Hunts 2x24uF (as the 39K), it has been replaced with a similar Wicon 2x24uF. With the tube line up it`s more or less converted to a Beolit 40, so the circuits has to be wired back to a

It was my intention to change the wires with some silicone types, but the color of the old ones has faded a bit. I have removed the chassis from the cabinet and it looks pretty good exept for a few minor things. The tubes installed is ECH3 EF9 CBL1 and CY1. The ECH3 and EF9 are not the originals for the Beolit, furtunately I found the Philips CCH2 and

I have began restoring my Beolit 39, but the wires inside are cracked, and for safety reasons I would replace them. Anyone who know the colors used ? Best regards Jorgen

Hej Har en ældre BC2300 (CDM4). Når den står uden tilkoblet højttalere/forstærker kører glas lågerne som de skal. Jeg bruger en Ice Power baseret Acoustic Reality Ear 202ref med 2x2,5 m skærmet signal kabel, når det er sat sammen vil glas lågerne ikke som jeg vil, de lukker i, men i samme