|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
Yes finally Apple today released a SW update where the user can select the output to 720p 50Hz. 4.4.2 (equal to iOS 5.0 for iPhone) It previously defaults to 60Hz which leads to issues in the whole european area (humming).
-
Und jetzt hat Apple das Problem richtig gelöst! Seit heute gibt es einen SW Update für Apple TV ATV2. Version 4.4.2 (entspricht iOS 5.0 für iPhone) Einstellungen Allgemein Software aktualisieren danach Einstellungen Audio & Video HDMI Ausgabe Auto TV Auflösung 720p HD, 50Hz auswählen (dieser Menüpunkt ist neu) Das Problem
-
This might be, because you have connected the setop box using HDMI AND SCART. Why do you have SCART? Remove the SCART and the delay is gone. (it is, because the BV7 wants to talk to the setop box via SCART). If you have SCART because of the AUDIO channels for Masterlink, then you can either: - upgrade the BV7 SW to the latest version and there is no
-
B&O recommends a Beo5/6, but it works with the Beo4 also. The setup can be done with Beo4 easy. To change a profile manually, it is not so easy as with Beo5/6. But in fact it is usually not necessary to change a profile, since you define a default for Video and another default for Audio. Go for it. You can always disable it.
-
AST allows to finetune speakers. Center is the reference. Center is in default and cannot be changed, but all others. ....when I remember correctly. You may download the AST user /reference Guide in the B&O download section. To enable AST, you just can enable on the menu. If your menu doesn't show up AST, you have to install the latest SW update
-
Don't know if I understood you correctly. SPEAKER 4 will never bring the BeoLab 7-4. 4 is without Center SPEAKER 3 or 5 will bring in the BL 7-4. The BL 2 Subwoofer is always in. See also the picture in the BV7 owners manual. In the settings, I select VIDEO SPEAKER 5, AUDIO SPEAKER 4 (or 2). VIDEO PROFILE TV, AUDIO PROFILE x. With AST I am able
-
Seit einiger Zeit nutze ich AST auf dem BV7-40. Habe mir dort folgende Konfigurationen erstellt. Meine LS: BL6000 Front, BL 7-4 Center, BL 4 Surround, BL11 Subwoofer TV : AST off, alle LS ein Audio 1: AST on, alle LS ausser Center (Position 1) Audio 2: AST on, alle LS ausser Center (Position 2) Audio 3: AST off, Front und Subwoofer Default TV: Speaker
-
Und hier noch ein Nachtrag Das Brummen mit obigem Tipp war nicht ganz weg. Ich habe jetzt in den Einstellungen des ATV2 HDMI von "Auto" auf "RGB hoch" eingestellt (das LCD Display arbeitet ja auch im RGB Modus). Jetzt gefällt es mir noch besser.
-
Ein Tipp, wenn es brummt. Bei meinem BV7-40 MK IV habe ich eine ATV2 angeschlossen. Aber leider brummte der BV7. Das gleiche Brummen, wie wenn man eine Quelle anwählt, diese aber kein Signal sendet. Aber der ATV2 war eingeschaltet, warum also das Brummen? Ich habe dann das Netzkabel des ATV2 um 180° gedreht. Ist ja nur ein 2-poliges Netzkabel
-
Hast Du unter Menu Optionen Ton AST ein/aus als Menupunkt? Wenn nicht, dann hast Du nicht die aktuellste sw. Ansonsten gibt es all diese Punkte, andernfalls auf der bo webpage unter support die neuste Bedienungsanleitung/Installguide runterladen.
|
|
|