Thx. That sorted the problem. I tried all different USB extension with no luck, but the powered extension was the answer. Thx a lot Paul Henrik

I have for some time experienced that the red lamp on BS5 sometimes is blinking while system is in standby. After a while it often stops again. I have a non B&O about 60 cm extension on my 4.5m B&O USB from BS5 to BM5. I thing this might be the problem since it is was not there before I had to put the extension on due to moving of system. Anybody

My BS5/BM5 has been frozeen all morning while updating. At 0800 it had downloaded only 24% and at 1200 it has only downloaded 63% of the update. My connection is 2 Mbps which should be ok (not fast). While updating and downloading I can't do anything on my BS5. I can't hear any music (N.MUSIC or RADIO) and the screen shows "update in %"

Can any one get BS5 displayed on an AVANT (W. tape, latest flatscreen model & surround module). I would like to have the BS5 menu, pictures and videoclips from BM5 viewed on my AVANT, but don't know if it is possible (yet)? I have only connected BM5/(BS5) with my AVANT through ML cable. What type of connection should I use to connect the two

THX Stefan. It works that way. I didn't know that, but it's logical it should be like that. Henrik

I have experienced that after changing to 'CD' and 'RADIO' on my BS5, my BV AVANT cant play the sound from my BS5 any more. I use to press 'A-N.MUS' on my BEO4 remote an then the sound was on my BV AVANT, but it dos not work any more! Is there a function that gets CD and RADIO sound over my AVANT that I don't know of? Any

Jeg har koblet BL3 på BS5 og ønsker en non B&O SUB sat til, men har lidt problemer. Jeg har købt et "DIN (5 pol) han til 4xphono hun" stik hos AV-connection som jeg vil forbinde til en Jamo Sub 550 (aktiv), men den spiller meget lavt (næsten ikke). Der er ingen Volumen regulering på SUB'en. Kan det være

I found out what's the problem my self. Apparently the BP5.00 when operating on Win VISTA, need to have turned the "User Control" or "program Launcher" control (don't know the correct VISTA english term) turned on, othervise it will not "launch" the BP5.00, but 4.86 works fine without! The "user control"

The "<< >> Go and ring" function is for the first time you setup the system, after connecting to the internet you have to prees and hold the 3 buttons "<< >> Go" and then move the ring to get the radio function working. It seem to me thats not the case for you, but it might be to slow internet connection?

Hello. I have got problems getting my Beoplayer 5.00 working on my VISTA PC. It's a VISTA HOME PREMIUM (SP1) edition with administrator rights, and even with Firewall and User Control turned off it dosn't work. The installation whent fine with no reported faults (tried 3xreinstallation). When VISTA is running, the BP5.00 icon is shown in the