|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
Page 1 of 1 (8 items)
-
Hi, Also have Beo 9000 Linked to a 10 40 TV, the TV being set up as Master. The sound card I am using is a Creative Audigy2 ZS Pro. It works very well with quite a good noise figure. When I first connected the PC to the 9000 I had quite a serious hum problem. The cause of this was found to be a ground loop linked to the aerial masthead amplifier. I
-
Hi, Have been using Free edition of MediaMonkey to stream music from my PC using the AUX input on a BEO 9000, works fine. Have recently tried Beoplayer on the same PC using Windows 7, which encounters a problem when searching the computer with NMUSIC. The displayed message is "Beonetmusic stopped working", it then shuts down. Was wondereing
-
Hi Rauber, Just tried connecting the HDR1 to AV4 on the 10-40 TV and it worked as you predicted. Also connected the Sky+ box to AV2 on TV and that also worked without any problems. Thanks again for your help, very much appreciated. Take care. Best Regards. Delboyone
-
Hi Rauber, Thank you for the information, I will try connecting the HDR1 and sky box as you suggest in the next 2 or 3 days, will let you know how I get on. Do not worry about your English, it is very good, wish my German was as good. Thank you. Delboyone
-
Hi Rauber and Vienna, Just looked at connecting the HDR1 to the AV4 scart socket on the 10-40, but at the moment AV4 is being used by a Sky+ box. As I have stopped my subscription to Sky the record and playback function of the sky+ box will be disabled about mid July, hence my thoughts about getting the HDR1 to work. Would it be possible to Daisy Chain
-
Hi Rauber and Vienna, Many thanks too you both for info, will try it in the next couple of days to see what happens. Will let you know the outcome as soon as I have had time to try it. Regards Delboyone.
-
Hi, Have just upgraded my Advant TV to a B&O 10-40 but am having trouble getting the TV to see the HDR1. At the moment the HDR1 TV scart socket is connected to AV2 on the 10-40 with AV2 selected on the BE0 4 by the VMem button. When VMem is selected the TV screen display is blank apart from VMem displayed on top of picturem. Have spoken to the dealer
-
Please can someone offer advice on the following problems I am having with my BS9000. The IR sensitvity of the 9000 is being reduced by the Plasma TV which is in the same room. I know this is a common problem with Plasma TV's and IR links and I was considering using an extender and attaching an IR mouse to the 9000. Is this a possible solution,
Page 1 of 1 (8 items)
|
|
|