Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Search

Page 1 of 1 (8 items)
  • Re: Standby Button Operation in Link Room Kills all Link Rooms!!

    Hi Thanks for your comment. I am aware of what you said and the button is momentarily pressed but it cuts all the link rooms. I thought that each room was stand alone and putting the link room into stand by was done by opening the speaker's relay in the room control box.
    Posted to General Forum (Forum) by PerroMal on 08-29-2011
  • Standby Button Operation in Link Room Kills all Link Rooms!!

    Reference here is to Audio System Only. I have a Beocentre 9000 in the central room. This ML equipment has its AV output connected to an ML/MCL converter. The converter feeds an MCL network to several link rooms. Each of these rooms has either X-Tra Speakers or X –Tra Active Speakers kits installed. I currently have a problem. Whenever the remote
    Posted to General Forum (Forum) by PerroMal on 08-29-2011
  • Re: B& O remotes 1000 and Beo4.

    Hi Stefan, This worked OK. Sorry about the late reply. Regards PerroMal UK
    Posted to The Beo5 & Beo6 Remote Forum (Forum) by PerroMal on 08-29-2011
  • Re: B& O remotes 1000 and Beo4.

    Hi Teddy Fr. Sorry this is a very late reply but thank you for the advice. Works OK PerroMal UK
    Posted to The Beo5 & Beo6 Remote Forum (Forum) by PerroMal on 08-29-2011
  • B& O remotes 1000 and Beo4.

    I have an old B&O set up 9500 which uses the remote 1000. I have later equipment but I use the 9500 in my study linked to my PCs and TV. I use "Shift"ATape" for some functions. When using the Beo4 remote this operation won't work. I relaise that B&O make a note in the B&O manual that there is not full compatabilty between
    Posted to The Beo5 & Beo6 Remote Forum (Forum) by PerroMal on 06-22-2011
  • Beo4 Remote and Skybox

    My B&O is set up with the added B&O PUC accessory. This allows the Beo4 remote to control the skybox. Unfortunately I have lost my write up the gives the remote buttons that tie up with Skybox codes. Does anyone have a current list? Regards PerroMal
    Posted to General Forum (Forum) by PerroMal on 01-08-2010
  • Re: Surround Sound & Active Speakers

    Hi Ralf and Steve, Thanks very much for your advice. I realised that sticking a power line-out into an active speaker used on a pre-amp line-in signal didn't appear to make sence but when it seemed to work I was like a dog with a bone and looking for a work around with common sense flying out of the window. I bought my Denon 1909 a few weeks ago
    Posted to General Forum (Forum) by PerroMal on 11-15-2008
  • Surround Sound & Active Speakers

    I am in the process of setting up a theatre surround sound system. My query concerns the audio side. I have a Denon 1909 AV receiver that only has speaker level outputs. The three front speakers and two surround back speakers are passive and work perfectly. My two side speakers are B&O Beolab 6000s, which are active. My particular query concerns
    Posted to General Forum (Forum) by PerroMal on 11-14-2008
Page 1 of 1 (8 items)