Keith Saunders: So, if you have a third party product which conforms to RC5, NEC or bitstream protocol's then the Beo5 XML can be programmed to use the repeat function, other protocols will need more research before a solution willbe provided. With regards to your second point where you say it has very low range are caused by very short and narrow

Why can't I set it to "Continuous" when using 3 party ir? If I mark the checkbox and click OK, then when I enter the IR tab again the mark in the checkbox is gone. Using firmware 1.40a with Config Tool 2.20 Here is the IR command (Sony LCD) <source_subItem stName='Sony LCD\VolUp' stCaption='VolUp' stMenuCaption='VolUp'

Keith Saunders: To clarify my previous answer about being able to control the 3rd party product volume with the centre wheel, the simple answer is you CAN, however it is NOT possible to do it with the Beo5 Configuration Tool using RC5 protocol without getting the problems you have discribed. You need the new 1.40a firmware and currently the associated

TWG: Is there a "changelog" what's different in the new firmware and in the new config tool? I would also like to know...

Weebyx: ujn2: That is not enough. That will not give you the full 1.34a firmware - there are still some things missing. Aha, what is missing, the remote says 1.34a as firmware release when i look in the service menu, and the 3rd party support is also working? /Weebyx I'm not sure, but I did also update my Beo5 like this when the 1.34a was released

Quim43: You need to edit the Beo5CT.exe.config and change these values: <add key="Beo5RevE.bin" value="1.34a" /> <add key="Beo5RevF.bin" value="1.34a" /> <add key="Beo5RevD.bin" value="1.34a" /> That will not be enough, you will still be missing some features when using this

That is not enough. That will not give you the full 1.34a firmware - there are still some things missing.

It's posible to make some pretty slick designs, anyway post your results when they are done!

I found out that for 4x3 grid: Bottom icons : 106x54 (1px black line in bottom) All other: 106x66

You can actually make them bigger here is an example, see attachment. If you do it on that way you can make some pretty cool design/layouts on your Beo5... I working on one, will upload it once it's finished! Edit: I think the 3 buttons on the left is 107x66 and then have 1 black pixel line on the left.