David, Thanks for your reply. I actually got my Power Link cables in yesterday, in hopes of keeping cables to a minimum. Unfortunately, while the display is now working on the Pentas, I am not getting sound! Please see my other thread - Graham has been trying to help me. I believe that I've followed all of the Instructions to make the Penta/Power

Graham, Still no go - I've tried working the switches back and forth and wiggling the plugs/jacks. I called the B&O Dealer in San Jose and they referrd me to their local repair center. I'll have to call the Penta guru in the morning. There just must be something I'm missing.... Thanks

I'll try the switches tonight - along with removing the Jack Panel from the underside of the Pentas to inspect those connections, Thanks again for all of your help!

Mute no help. Matter of fact, I couldn't get the mute to work with the RCA's connected. I now have the RCA's and Power Links connected (just to prove the speakers. I've got $96.00 invested in those Power Link cables - like to have them working! Graham, I appreciate your help! Thanks, Chris

Graham, Followed your directions - only thing that changed is now both speaker displys are lit - still no output. Then, I reversed the Chain and connected the other speaker first... Finally, I've even connected the 2 speakers direct (one cable to one 9300 output). These are BRAND NEW B&O cables, purchased from dealer (#6270698) I'm sure

Just got my 5m Power Link II cables to connect my BC9300 to Penta 3's. I have already tested the speakers via DIN-to-RCA plugs and everything was OK. I cannot get the Pentas to work with the Power Link cables, although I have followed the Instuctions from the Manual for Penta 3. I have 1 cable connected from the "Power Link 1" of the BC9300

Thanks!!!

I'm connected to "Power Link I" I've noticed that when I place the 9300 on Standby, the Bass/Treble setting return to "0" (rather than the +4 & +5 that I prefer).

I wired RCA's ( which the Pentas have) to a 5 pin DIN. Am able to control volume from the Beocenter. I was wondering if when I get the Power Link Cable, will the ML1000 control the volume at the speakers. Thanks

Graham, Thanks for yopur reply. What is it that you prefer about the ML1000 vs. Beo4? Also, I currently have the Pentas connected with RCA cables. When I get the Power Links, will there be some control over the speakers vs. the Volume control on the 9300? Chris