Graham, Thanks for your suggestion. It turned out to be a faulty Powerlink cable giving me the grief with my setup. Regards Mark

Thanks everbody for your help. I am swapping the MCL/ML coverter for another unit and hope that will solve the problem. The Powerlink cable is Mark II as I purchased at the same time as the converter and I has powered everything down to re-set but this did not help. I checked all the cabling and made sure the left and right cables were correctIy placed

Hello All, I am hoping someone may be of assistance with my setup. I recently purchased an ML/MCL converter (new from B & O) to go with my Beosystem 2300 to my ML link system which is powering 2 pairs of passive speakers. My Beocentre 9000 was previously my main system and ran the ML fine. I have installed the Converter and connected via Powerlink

Hello All, I have just purchased a Beosytem 2300 with Beolab 2500 speakers. Can the Beolabs be wall mounted and if so are there special B & O wall mounts? I currently have some RL 60.2's wall mounted and hoped to replace these with the Beolab 2500's in the same room. The room is pretty small and the RL's have always been a little too

Peter & Graham, Thanks for the advice. I was aware that the 9300 was inferior to the 9500 but not too many of these old systems become available. I have the old MCL links for 2 additional sets of speakers and would prefer not to have to re-configure everything so a newer Beocenter seemed like the best option. I am not a fan of the current B &

Hello Everyone, I currently have a failing BC9000 with a Beogram 9500 and am considering a second hand BC9300. I believe that the BC9300 did not have a dedicated Phono input. Is it still possible to connect my Beogram 9500 as I still love my vinyl ? I know this subject has probably come up before but I have not find a direct answer on the site and so