Peter, You are a star of the old order and wish this planet of ours had more like you. As soon as my mine is sorted I'll pop yours back in post via RM SD. I have your address and phone number. Again, I cannot thank you enough. My very best wishes, Brian

Hi Peter, Your BS2 arrived on Saturday, many thanks. Placed it onto the docking station with your SD card in it, no problems, exchanged your card for one of mine, again no problems with your BS2. Inserted your card into my BS2 and, well i guess you know what happened So, I've now counted out the docking station and my cardsas the problem so I guess

The BS2 is perfect as I have proven that the docking station is not at fault. Once i have received your BS2 and can determine whether my cards are faulty (which am sure it cannot be, in fact one 1GB was recently replaced by SanDisk) or that it is my own BS2. Again, many thanks for all your valuable help, am grateful for all. Cheers (Hic), Brian

Hi Peter, Did you get my PM? Was looking at the PM this evening and it appears as if I sent it to myself Let me know. Cheers (Hic), brian

Already been to my B&O dealer before coming to this site. My docking station works fine with their BeoSound 2 and mine has the same problems when on their docking station. One of my cards were reformatted by them, all appeared to work fine until music was copied via BeoPlayer and also Windows MediaPlayer (ver. 11) then WHOOOOSH! Back comes the annoying

Hi Peter, When placing the BeoSound 2 on my docking station (without phones connected) and is plugged into my laptop I get an amber light followed by one beep then two beeps then a flash of amber again with indicates it is trying to reset itself. This continues until BeoSound 2 is removed from the docking station. Plug phones in, in play mode and replace

Hi Peter! Woe is me as I drown in a bucket of tears I reformatted my SD cards and all did appear to be OK but once, using Beoplayer, I copied music to the cards the problem came back. So it seems I am back to square one. While the cards are empty everything works fine in as much as the BeoSound is recognised while on the docking station by my system

Many thanks Peter for the advice. Did what you suggested and all appears to be working solid now. Also, did notice one other fault which your solution seemed to have rectified in that before my Beosound 2 appeared to be stuck in iTune mode and using the keypad could not get out of it and back to Beoplayer mode. After following your advice was able to

Am hoping someone can either identify my problem or possibly suggest a work around. First off, the docking station has been checked out and is perfect! Beosound 2 (without phones) placed on docking station is not recognised, get one beep then two and amber light. This is repeated every so many seconds till removed from docking station. Plug in phones