Hi Tigger , I have a similar problem , trying to conect a Panasonic TH42PX700 to a Beosystem 2 ( sofware 1.6 mk3 version 2 HD ) with no luck , I have tried the Lektropacs CP251F but still no video output , if you look at my posting I have found ( or Ithink I have ) that the video is switched on by a feedback signal from the B&O panel on pin 13 the

Hi Ralf , I have now got the Beosystem 2 working , by entering the sub menu when it is connected to a B&O plasma. The sub menu needs to be entered - when in the set up menu press ' 00' ' go' and check the plasma version setup -- plasma version PDP 42 D8 then using -- VGA-input set to VGA/Ypbpr and the DPD slot1 to the same setting

Hi Frog , Can you give any advice please ? or anyone who has overcome this problem I have purchased a Lektropacs CP255H scaler/conveter and I have had no joy with set up ! Using a 15 pin D plug -- RGBHV 575p 50HZ from the Beosystem 2 into the scaler using - 15 pin D plug and tried 3RCA composite The Panasonic will see the Scaler (and the on screen menu

Thanks very much Frog I will try the box and report the results Regards Chris

Can anyone help please ? The setup between BS2 and a Panasonic TH42-PX700B plasma ?? When connected via the pc input it will not see the correct signal and the panel shows 60hz when connected - with no picture ?? I believe the BS2 is 50hz with 576p ? would a scaler/converter do the trick ? Is there also a way to add a rs232 to the Panasonic to switch