I give up for now rather than fill this thread up with failed attempts Brian

Guess I should have copied them as direct links. Will try that below if it doesn't work please excuse me. http://i838.photobucket.com/albums/zz303/brianbrianbrian/DSCN5578.jpg http://i838.photobucket.com/albums/zz303/brianbrianbrian/DSCN5579.jpg http://i838.photobucket.com/albums/zz303/brianbrianbrian/DSCN5561.jpg http://i838.photobucket.com/albums

http://s838.photobucket.com/albums/zz303/brianbrianbrian/?action=view&current=DSCN5578.jpg http://s838.photobucket.com/albums/zz303/brianbrianbrian/?action=view&current=DSCN5561.jpg the problem 120 ohm resistors, top, to left of centre. I'm also restoring a 609k which has the same tuner section and these same resistors are way out of spec

Hi, have finally got the components, time and other necessaries together to try to restore the Minette tuner. Replaced small electrolytics and some resistors on the board, specifically caps 32, 41 and 33 and resistors 12, 14, 34, 35 and 39. It's working (listening to it now) but only in mono. Would like to post some pics but not sure how. Can anyone

What a helpful and friendly lot you are! Thanks for all the replies, particularly Tournedos, for the information about the caps. Doctor, when I get back to Stockholm I'm going to check which cap it was that had what I suspected to be a disconnected lead. If you could check on your schematic and confirm that it should, in fact, have that lead connected

Hi forum members, joining as a new member with a specific need, hope that's alright. Recently bought above mentioned 609k valve receiver but it turns out to be in a pretty bad state with at least one, long time ago, attempt at repair, probably doing more harm than good. Subsequently it must have been stored in an attic as it's full of dusty