From a glance it seems an easy task with a sideward force would do the job but in reality it`s rather difficult to have the board disengaged from the positioning-mounting clips.Is there any special trick to have the job done in a easy way?

I Have tried several times without success！The message just repeated itself and getting longer and longer...！？ Here is the original message posted: The problem is caused by a faulty 7915(the measured voltage is -21V instead of -15V) and after replacing the regulator, a dead 9000 comes to live but the output signals accompany with unexpected load annoying

Normal 0 <!-- /* Font Definitions */ @font-face {font-family:宋体; panose-1:2 1 6 0 3 1 1 1 1 1; mso-font-alt:SimSun; mso-font-charset:134; mso-generic-font-family:auto; mso-font-pitch:variable; mso-font-signature:3 135135232 16 0 262145 0;} @font-face {font-family:"\@宋体"; panose-1:2 1 6 0 3 1 1 1 1 1; mso-font

The problem is caused by a faulty 7915（the measured voltage is -21V instead of -15V) and after replacing the regulator, a dead 9000 comes to live but the output audio signals accompany with unexpected loud annoying cracking distortion sound properly a symptom of burn fets(Tr102 and Tr202) as the outputs are taken from R156 and R256. The burnt PF5103

The problem is caused by a faulty 7915（the measured voltage is -21V instead of -15V) and after replaced the regulator, a dead 9000 comes to live but the output audio signals accompany with unexpected loud annoying cracking distortion sound properly a symptom of burn fets(Tr102 and Tr202) as the outputs are taken from R156 and R256. The burnt PF5103

My newly acquired Beocord 9000 arrived this afternoon from Holland. The deck has been serviced once by B&O 10 years ago and have been kept unused for the last five years according to information given by the seller. As I powered-up, the mechanism responsed smoothly to all the function-buttons and in play-mode,with signals shown in the leds meter

Thank you, Martin. And I will upgrade my membership statue and download the required SM

Just bidded a used Beocord 9000 from ebay and an english version service manual is badly needed to get it back to life. Perhaps some one from this forum might give me a helping hand Thank you.