Had everyone found out on such issue? I have the same situation with Beogram 5005 with MMC2. Is that a cartridge fault?

Dear Graham, Thank you very much for the explanations! Today I've opened the "trunk" easily (then it is necessary to move the tonearm back to the right side from the center to reach the Eccentric "E"). Then I turned the Eccentric 180 degrees, that moved the tonearm start position 2 mm inside (closer to the center of the disc

People are still driving LADA in this country! So hope, that keeped our @$$e$ away from our hands!;-) Thank a lot for the detailed advise: I've noted that ingenious "trunk" fixing at the bottom, when only received the Beogram. Will try that today and keep posted. Think, there is a little adjustment needed- there is a 2mm tonearm position

Thanks a lot for a detailed advise- I've added the N.RADIO button, and now works perfectly!

Could not find that eccentric, provided by picture in the Service Manual. Could someone explain, where should I look? Seems it is somewhere at the right- near the tonearm. Is it reachable if I remove the metal disc and the plastic round cover? Thanks a lot in advance! BR Dmitry

OK- I see it on the picture. There is an Eccentric disc (marked with "E"), and the directions are mentioned "IN" (counter-clockwise) and "OUT" (clockwise). Will reach the Beogram tonight, and will check out alive. Will report on the results. Thank you very much!

Now I see there the Eccentric Disc "E", but cannot understand, where is it located- is it under the outer metal disc, covering the mechanism, or under the back panel, hiding the lid opening hooks?

Found the Service Manual. Is it the Pickup Parallelism, that can adjust it?

Hi, everyone! Faced the following trouble: when starting the vinyls with the wide empty edge (when the lead-in groove is 2-3 mm from the edge), the head slips off the vinyl, and falls down! Is the starting point adjustable? I'm afraid, if these tricks continue, that will kill the MMC2. Many thanks! Dmitry

Stefan, Thank you very much for your great help! Will try to do that tonight, and will report. BR Dmitry