I have a newly purchased 4004 and the arm with the cartridge rested against the optical arm . I have adjusted the 2 screws in the back to get it so it does not touch. But, they still are not parallel. The arm does go down and up as it should but needs proper adjustment. Does anyone have the proper instructions for aligning he arm? Any help would be

Martin, With the fuses replaced the platter turns as expected, (both 33 and 45). The arm has some major issues. Stopping will eventually return the arm to the right but the motor keeps running until you either push the carridge to the right , unplug the table or use one of the other buttons. With the arm wanting to be agianst the optical arm, well,

Martin, I just purchased the table. it was supposed to be working properly. After I changed the ac plug and made sure the switch on the bottom was set to 110 it would not turn on. The fuses were blown possibly prior to me plugging it in. I need to get some fuses and try it again. Then send an email to the person if it blows again. Another item is the

Martin, The number is 5527. That is inside on the black box where the power comes in. On the fuse box it says 2 x ,125 with some letters after it. Yes, that is a comma which is what is used in Europe for a ".". Thanks

Martin, Thanks, I do not have the table in front of me so I will have to look at it tonight. I am in Pacific time zone. Will let you know late tonight or Wed. Thanks Again

US 110 VAC Thanks

New member and new to forums, so please be patient. I need to know the value of the 2 fuses on my 4004 Turntable. I believe on the fuse box is says .125 (1/8 amp). I just want to verify this is the correct value. Thanks Jim