Hello Everybody!!!! I did it, I am ready!!! I just finish to make the set up of the speakers of the MX7000. I have keep all the panels, otherweise the systems doesnt work at all. Now just felt the tunning part to make that Beo-Jorge looks gut :-) I send you some pictures of the results. Please notice that after several wiring cuting and sorthing the

yes we are :-) in order to get a separate power supply you better look for a any kind of device and look how many Volts you get. A power supply of a Laptop you get 18V. But I think you need 40Vols (+20/-20). how do you want to solve the volumen control??

Hello to all!! after trying severals ways to put the all moduls I have found a way to put all in place without using a lot of space. As you can see it looks like a mess but i will short all the wires and put it everything clear. that is only the way I am going to put it. Any comment? I have had to extend the wires from the Left and Right amplifier to

Yes I have a service manual, I dont know how to get +20/-20 V power from Main Board #4, as I told you that was also my first try. But I didnt follow that way because the systems colaps inmediatly wehn you put any of the wires of the set. And worst I would not be able to use the remote control, so there is no way to control volumen or swith on/off. Dont

Hello again: this is my actual "status" :-) I still cann hear the music like this :-) I will keep you informed: if you have any coments just let me know. jorge

EYYY!!!!! you are my man!!!! we are doing the same project!!!! I tell you what I have done: The only way to keep the speakers playing is puting the MX in audio mode. That means I conect a CD player to the Audio Aux and type AV + RADIO in the Beo4. In that way the MX7000 only plays like and amplifier and you cann disconect the CRT, the power suply and

I am still alive!!! thank you. I have already disconect it from the chimenee, thank you very much. jorge garcia ps. I take care, thank you for the advice.

Hello to all. could some one tell me how can I disconect the flyback cable from the neck? is the black wire on the photo. thank you. I would like to change the main board power suply but I do not kwnow how to unplug this wire. thank you jorge

Eureka!!! yes I did it!!! I did the way you told me. My problem was the diagram that I have for the Audio Aux was wrong. I make the input via Audio Aux, and later with the Beo1000 press AV RADIO. it works and I can disable the flyback and the CRT power suply. Rest of the panels cannot be disconectet. now i will start doing some Tunning of the box, and

FIASCO!!! NO WAY!! is not posible to do my project. If I try do disconect any of the panels the all system stops. even a small cable von tuner. I dont mind to keep all panels but also the tube cannot be disconected. I cannot use the speakers us I wanted. I tried also to use only the part 46 "Headphones & Amplifier & power supply",