Hi guys Having some trouble programming my beo5 for my pioneer KRP500. Apparently this product is a bit more tricky than others I have. If someone has both of these products I would really appreciate if you could learn some codes from the remote with the lintronic box and send me the result. Keith has been extraordinarily helpful but we have yet to

[quote user="Keith Saunders"] Let me explain in much greater detail. We have established that your Pioneer screen uses NEC protocol and that the carrier frequency used is 40 Khz and the commands in the file you sent to me from Pioneer are for your screen. I said what about the product address ? With the NEC protocol, the product address can

[quote user="Keith Saunders"] Whilst the command for toggle on/off may be AA1C there is also 128 possible product addresses from 0 to 127, so you can have the right command code, but not the correct address. In the file you sent me there was no product address. [/quote] Ok, you lost me.. Product address? And can i manually go through them

[quote user="Keith Saunders"] [quote user="eljefe"] I am however pretty sure that the codes I sent you are correct. I got an excel file from Pioneer in denmark with the ir commands as I wrote in my previous post and matched these with the codes online. Isn't this ok to do? Further, does it have to be a lintronic box? Can it not

[quote user="Keith Saunders"] The best course of action is to get a IR capture product or a Lintronic box then you know for sure you have the correct infra-red codes. After reading further about Pioneers codes its clear they change the codes for almost every product by giving it a different address code, so finding someone with a Pioneer TV

[quote user="Quim43"] Have you tested the xml file making a new configuration or just modifying an old one? It happened to me, I just modified an old configuration and the new commands didn't overwrite the older ones. Try to begin from zero, to see if the xml file works on your TV Good luck [/quote] Have tried both. Nothing seems to work

[quote user="Keith Saunders"] [quote user="eljefe"] Could I maybe persuade you to make an xml file with a couple of codes(like turn on/off) and then make it like you would suggest. this way I would be able to find out if it is my own fault or there is something else wrong. [/quote] You can download a test XML file HERE [/quote] Doesn't

[quote user="Keith Saunders"] What version of Beo5 Configuration Tool are you using ? [/quote] Version 2.2

[quote user="Keith Saunders"] [quote user="eljefe"]I have been trying to do a bit of research on the subject and it seems that the Pioneer Elite models are using high frequencies as carrier so I suspect this to be the problem. I can't however find out what this frequency is[/quote] I have had a look at your Pioneer pronto file

[quote user="Keith Saunders"] [quote user="eljefe"]I have been trying to do a bit of research on the subject and it seems that the Pioneer Elite models are using high frequencies as carrier so I suspect this to be the problem. I can't however find out what this frequency is[/quote] I have had a look at your Pioneer pronto file