Thanks, Graham.

Thanks for the quick reply, Martin. No there is no sound coming from the motor. The "33" display stays normally on all the time and once the tonearm cannot get any further, the stylus stays in the same groove. Zlatan

Hello everybody, I need some help. When I start playing a record, the tonearm moves to the correct drop-down position and the stylus lowers to the record correctly. It starts playing, the tonearm following the groove, but the laser guide arm stays put in the initial position. Basically, the two arms are trying to separate. Eventually, the tonearm starts

Thanks Mika!

Does MASTER CONTROL PANEL 6500 work with BEOMASTER 7000 and the rest of the system? Which remote controls, and to what extent, can be used with the Beosystem 7000 (BEOMASTER 7000 + BEOGRAM CD 7000)? Zlatan

Thanks Martin, I'll follow your advice.

Thanks! I did switch it off and on again and it relesed the cassette. Quite simple.

When I try to play a record and press the switch 33 (or 45), the pick-up arm, which actually sits on the base plate of the centre, rather than being in a horizontal position parallel with the base (raised above it), slides towards the record and hits its edge. If I put the needle manually on the record, it plays normally until the completion of the

I have recently acquired a Beocord 3300 and it worked fine. Today I inserted a cassette and pushed a play button but it would not move. Whatever button I press, nothing happens - the cassette is stuck in (the heads have locked into the cassette and will not retract) and I cannot get it out. All the ligjts are lit and everything seems to be OK. The tape

I have a Beomaster 5000 and Master Control Panel both in a good working order with only one problem - I cannot set the date and time. I can chose the day but the "orange dots" for the time do not respond. Anybody knows what the problem can be?