|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
Hi, it's me again. So, i didn't turn into an amazing technician overnight, but i did learn some stuff by reading and measuring. I've gone through a few components, verifying their correct state, and thus eliminating possible causes, but find myself again at my wit's end. And so was hoping that maybe you could enlighten me. Here's
-
Understood. That's a very tactful way to put it All in good time. I'll have a look at it, and keep you posted. Once more, thanks for all the help you have provided (and probably will have to again). Sebastian
-
Yeah, i hear you, Martin. I'll try and tinker some more, with elements already covered, read around, and see if i could maybe learn something. I actually love doing stuff by myself, be it whatever, and it's still frustrating, even though i'm able to admit it's way over my head, to close the box and take it to the shop. But hey, one must
-
Thanks Martin and Ville, i wondered what that screw was for, it was not even described in the service manual i have. Will do the grounding later, here in France all the wall outlets are grounded when in a new construction, and with each renovation of old appartments they are obligatory replacements. I reassembled the whole unit for a tryout last evening
-
[quote user="Dillen"]Different types of transistors can be used, AC126 is possible. I seem to remember that the first transistor is closest to the nearest outer corners of the amp. board. The service manual will tell you which one(s).[/quote] Yep, that's AC126 for me, will have a look at them. [quote user="Dillen"]It's possible
-
[quote user="Dillen"]Wow, good job ![/quote] Cheers, Martin, but this is entirely thanks to you. I wouldn't have even tried anything on it was it not for your patient instructions when it was clear (and still is) that i don't know anything on the subject. [quote user="Dillen"]Swap the leads to the speakers to see if it's
-
Ok, can you guess i'm spending this Christmas alone ? Must've been all the desoldering and resoldering, and the fact that one of the output transistors had some faulty insulation (i don't know, could it ?), but gradually i put everything together, and at each step it seemed fine, until just a minute ago i tested it complete... and MUSIC
-
[quote user="Dillen"]Obviously a serious short somewhere and we will have to isolate some circuits to diagnose further. On the large blue capacitor, there's usually a bunch of leads going to one of its tags and only one or two going to the other. Try desoldering the large bunch from the one tag and measure from the other tag to each lead
-
[quote user="Dillen"]You need to check those leads against the servicemanual and make sure they are properly insulated.[/quote] Yes, sorry about the rambling, i'll try and refer to schematics so as to not invent my own conventions (thank heavens for your patience). I've been checking and rechecking the wires with the schematics, and
-
Perfect, thanks for all the information. In fact, armed with my newly acquired intelligence, i remeasured the caps at the smallest scale (200), and the 514 measures still 00.3, and the big one is higher no matter which way i test it. So i desoldered the two red wires like you suggested (isolating the amplifier). Sebastian
|
|
|