in Search

Browse Forum Posts by Tags

Showing related tags and posts for the Products Related Forums group. See all tags in the site
All Tags » workbench (RSS)
  • Attyca 1 project

    My attyca 1 is in need of renovation. The bench has a scratched edge . Has anyone tried to restoring an attyca bench with a scratched edge ? Do you have any good ideas to restore the edge ? I'm thinking of putting an angled sheet of brushed aluminum or stainless steel.
    Posted to The Workbench (Forum) by Krona on 02-19-2012
  • Front Panel Fonts

    I am working on restoring a Beomaster 1700 amp, and would like to be able to be able to repair damage to the printing on the slider controls and front panel. What fonts did B&O use in their designs, and do members have any recommendations or tips for restoring damaged front panels? It seems to be...
    Posted to The Workbench (Forum) by ormej01 on 01-11-2012
  • Beolab 2500 - Voltage Problem

    Hi Guys, I've just joined and am starting off with problems !!! - I have inherited a pair of Beolab 2500 speakers, but they are set for 120V and not for 240V supply - I've been doing a bit of reading on this forum and there are some posts which say that the transformer can deal with both inputs...
    Posted to The Workbench (Forum) by Crawford on 12-18-2011
  • Beovision Avant 28" 50Hz Type 8133 - HELP ME PLS

    Hello! I have just a bught an Avant Type 8133 on an auction site. I live in Hungary, our PAL system is B/G, but the set has the PAL-I system. I can not tune in stations with cable TV with sound, only with picture and white noise. According to the service manual, many Type revisions share the same I/F...
    Posted to The Workbench (Forum) by widerstand on 08-12-2011
  • No power from my Beolab 7 speaker to my TV

    After searching the forum I could not find an answer to what seems like a small and simple problem, so here it is: I changed my Beolab 7-1 for a 7-4 (because in surround setup I think it sound much better). Upon installing I noticed the power out socket on the back of my new 7-4 was covered with some...
    Posted to The Workbench (Forum) by nv on 08-02-2011
  • Beocom 4 Power Supply

    I just wanted to share my experiences of fixing a power supply problem with a Beocom 4. Other posts suggest that this may be quite common. My Beocom 4 developed an intermittent power supply problem that I eventually traced to the connection between the charging cable and the plug in charger. I initially...
    Posted to The Workbench (Forum) by Guy1680 on 06-03-2011
  • Repairing a Beolit 707

    On the other day, i spotted a nice Beolit 707 on the auction site. I won and waited for the nice classic item to come to my hands. The seller stated that the radio was fully working. After some days it was there. Cosmetically as described (in a very very good condition i must say). Unfortunately when...
    Posted to The Workbench (Forum) by DrDimitris on 05-29-2011
  • Beovox S45.2 cab refinish?

    I've just recently picked up a pair of S45.2's. The drivers are intact and sound great, however the cabinets (rosewood) could benefit from a bit of refinishing. Nothing major... just a little scratched and faded. Anyone have experience refinishing these? Any special precautions I should take...
    Posted to The Workbench (Forum) by macguyft on 02-15-2011
  • Logic board (amplifier) for a Beomaster 5500

    Hi this is my first post in this forum and i hope i am posting in the right section, i was given a beosystem 5500 I am an electronics fan and loved the system at first sight, when i tried to connect everything worked except the speakers, i am a computer technician so i opened the unit and found that...
    Posted to The Workbench (Forum) by rfarfan on 10-27-2010
  • BEOVISION MX 5500 (3251) Multiple Problems?

    Hi, I have a BEOVISION MX 5500 (3251) That is having multiple problems? I juts picked up a car load of older B&O stuff from a Beophile downsizing and this was in the mix. I live in the USA and am trying to connect the TV to an over the air Digital TV box. I have tried to connect it through the co...
    Posted to The Workbench (Forum) by Veloseller1 on 03-09-2010
Page 1 of 3 (29 items) 1 2 3 Next >
Need a cable? Just ask Steve at Sounds Heavenly Need a cable? Just ask Steve at Sounds Heavenly Need a cable? Just ask Steve at Sounds Heavenly
Beoworld Security Certificate

SSL