in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012


Browse Forum Posts by Tags

Showing related tags and posts for the The Workbench forum. See all tags in the site
All Tags » repair (RSS)
  • Redline 140 floor stands repaint?

    I am starting to restore a pair of redline 140s and the stands have quite a bit of rust and paint missing. Does anyone have any ideas how I could repaint to either a very similar finish to the original, or something that would look suitable for the black redlines? Any ideas appreciated.
    Posted to The Workbench (Forum) by Jimburg on 02-26-2012
  • Attyca 1 project

    My attyca 1 is in need of renovation. The bench has a scratched edge . Has anyone tried to restoring an attyca bench with a scratched edge ? Do you have any good ideas to restore the edge ? I'm thinking of putting an angled sheet of brushed aluminum or stainless steel.
    Posted to The Workbench (Forum) by Krona on 02-19-2012
  • Front Panel Fonts

    I am working on restoring a Beomaster 1700 amp, and would like to be able to be able to repair damage to the printing on the slider controls and front panel. What fonts did B&O use in their designs, and do members have any recommendations or tips for restoring damaged front panels? It seems to be...
    Posted to The Workbench (Forum) by ormej01 on 01-11-2012
  • Beolab 2500 - Voltage Problem

    Hi Guys, I've just joined and am starting off with problems !!! - I have inherited a pair of Beolab 2500 speakers, but they are set for 120V and not for 240V supply - I've been doing a bit of reading on this forum and there are some posts which say that the transformer can deal with both inputs...
    Posted to The Workbench (Forum) by Crawford on 12-18-2011
  • Beocenter 9300/2300 sparepart

    Does any have the Qudratur-detector coil (Pos L8- order-no 8022327) from FM/AM-board (01, order-no 8001413) or a defect FM/AM-board ??
    Posted to The Workbench (Forum) by Per Nørreslet on 06-19-2011
  • Repairing a Beolit 707

    On the other day, i spotted a nice Beolit 707 on the auction site. I won and waited for the nice classic item to come to my hands. The seller stated that the radio was fully working. After some days it was there. Cosmetically as described (in a very very good condition i must say). Unfortunately when...
    Posted to The Workbench (Forum) by DrDimitris on 05-29-2011
  • Beovox S45.2 cab refinish?

    I've just recently picked up a pair of S45.2's. The drivers are intact and sound great, however the cabinets (rosewood) could benefit from a bit of refinishing. Nothing major... just a little scratched and faded. Anyone have experience refinishing these? Any special precautions I should take...
    Posted to The Workbench (Forum) by macguyft on 02-15-2011
  • Logic board (amplifier) for a Beomaster 5500

    Hi this is my first post in this forum and i hope i am posting in the right section, i was given a beosystem 5500 I am an electronics fan and loved the system at first sight, when i tried to connect everything worked except the speakers, i am a computer technician so i opened the unit and found that...
    Posted to The Workbench (Forum) by rfarfan on 10-27-2010
  • Repair on a Master Control Panel 5500....?

    Could anyone point me in the right direction, toward someone with technical ability who could possibly have a go at repairing the rotary volume control dial on a MCP5500. The unit itself is in pretty good shape, and every other function seems to work fine. Shame then that the rotary dial (which is not...
    Posted to The Workbench (Forum) by Bentleyman on 10-02-2010
  • BEOVISION MX 5500 (3251) Multiple Problems?

    Hi, I have a BEOVISION MX 5500 (3251) That is having multiple problems? I juts picked up a car load of older B&O stuff from a Beophile downsizing and this was in the mix. I live in the USA and am trying to connect the TV to an over the air Digital TV box. I have tried to connect it through the co...
    Posted to The Workbench (Forum) by Veloseller1 on 03-09-2010
Page 1 of 3 (29 items) 1 2 3 Next >