Can anyone tell me the part numbers for TR52 and TR53 for board 8002095 on a Beomaster 4000 type 2408 Thanks in advance Kris

Well, our new kitten somehow got ahold of my A8 earphones and chomped clean through the wire running to one ear. Anyone out there successfully soldered one of these back together? -- Paul

Hi all, I have posted questions related to this issue in the General Forum, but I guess this is the more appropriate forum for things B&O which have died... I have now spend hours working on this Penta III amp unit and have had no luck. I began with the powerlink cables, and the BC9500 and can confidently...

Hi; I am trying to diagnose and repair a problem with my RX2 5833 turntable. When the stylus lands in the groove, there is bass distortion. If I cue the arm up and down for several times, the arm will eventually seat properly and the stylus will play the record perfectly with no distortion. I think I...

Hello I live in London andI have just inherited a beautiful BEOCenter 3500, the system includes a pair of Rosewood BEOlux 3702. Unfortunitly the turntable motor, unit transformer and a subwoofer in 1 speaker needs replacement. Can any one please assist me on were I could find replacement parts,as I want...

I have a couple of Beolab 2500 and they sound different. One of them has more bass and more treble. I had to open one of them to solve a problem and saw there are a couple of adjustable resistors that modify the bass and treble. Anyone knows the procedure to adjust them to get from both speakers around...

Since a few months I’m the happy owner of a 2hand Beovision Avant 28” VCR 50Hz/MK-I/MK-II, type 8111 (yes, a pretty old one J ). The set was equipped with a new tube (as was said to me by the private person who sold the set to me). After installing the Beovision at my home, sometimes the...

Hi all, I've finally got around to repairing my 1976 Beocord 2200 - type 4601, which I've had since new. The 2 problems are very specific: 1. When pressing PLAY >, with no cassette inserted, both the tape cogs rotate as expected. With a cassette inserted, the forward cog (pull) does not rotate...

Both speakers on my BeoVision 2000 have suffered foam rot, and therefore have bits missing. I suspect that refoaming such small drivers is not practical - are the originals, or something very similar still available? Mark

Newbie here--first post I've got a pair of Beolab 6000s from about 1996. The rubber surrounds in all four midrange speakers are cracked/torn. I would like to repair them, but the surrounds that are sold on ebay do not fit these speakers. I have some skill at this and I want to repair them myself...