in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012


Browse Forum Posts by Tags

Showing related tags and posts for the The Workbench forum. See all tags in the site
All Tags » beovision (RSS)
  • No power from my Beolab 7 speaker to my TV

    After searching the forum I could not find an answer to what seems like a small and simple problem, so here it is: I changed my Beolab 7-1 for a 7-4 (because in surround setup I think it sound much better). Upon installing I noticed the power out socket on the back of my new 7-4 was covered with some...
    Posted to The Workbench (Forum) by nv on 08-02-2011
  • Lightning-hit Beovision LX 2802. Worth trying to repair?

    Hello, I inhertited a Beovision TV set that got struck by lightning a few years ago. Since I live in Asia, the closest shop (and only one in the country!) is located 750 km from here. I thus would greatly appreciate if some experimented members could give me some clues as if there is any hope of getting...
    Posted to The Workbench (Forum) by Mitker on 07-06-2010
  • Beovision remote for 7802 tv

    Hello, My sister in law sent me her beovision remote control in the post to look at as it had stopped working (the fault was dry joints and a dodgy PP3 battery clip) but unfortunately when I first opened it the buttons fell out and I have no idea of the correct placement of the the four bottom buttons...
    Posted to The Workbench (Forum) by rjb on 04-13-2009
  • Beovision LX 5500 does not respond to remote

    Hi all, My old Beovision LX5500 does not respond to any commands from the remote control (Beolink 1000 Mk 3). The remote seems to be working fine with a Beosound so I suppose the remote is not the problem here. Details and background information follow. I apologize for them being a bit long-ish. The...
    Posted to The Workbench (Forum) by uffis on 08-01-2008
  • Avant VCR circuit board compatability - Curved vs Real Flat

    Is it true that, on the 32" Avant VCRs, the only (electronic) difference between the curved and Real Flat variants is the East-West board? In other words, the CRTs have the same pin-outs, and the only difference is in the board which deals with the geometry issues. Or to put it another way, could...
    Posted to The Workbench (Forum) by deaddruid on 07-17-2008
  • Beovision Avant 28" can not be turned on from stand-by mode

    Since a few months I’m the happy owner of a 2hand Beovision Avant 28” VCR 50Hz/MK-I/MK-II, type 8111 (yes, a pretty old one J ). The set was equipped with a new tube (as was said to me by the private person who sold the set to me). After installing the Beovision at my home, sometimes the...
    Posted to The Workbench (Forum) by Artimes on 01-23-2008
Page 1 of 1 (6 items)