in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Browse Forum Posts by Tags

Showing related tags and posts for the The Workbench forum. See all tags in the site
All Tags » avant (RSS)
  • BeoVision Avant 28" 50Hz slowed down

    Hello! I just got this problem with my avant: From mains powered on, it can be switched on, everything is allright, picture 100% sharp and clear, no flyback lines. Sound is okay, crisp and no hisses. when i want to change mode(VCR, Camcord), or switch channels, it just freezes, for example it changes...
    Posted to The Workbench (Forum) by widerstand on 02-17-2012
  • Beovision Avant 28" 50Hz Type 8133 - HELP ME PLS

    Hello! I have just a bught an Avant Type 8133 on an auction site. I live in Hungary, our PAL system is B/G, but the set has the PAL-I system. I can not tune in stations with cable TV with sound, only with picture and white noise. According to the service manual, many Type revisions share the same I/F...
    Posted to The Workbench (Forum) by widerstand on 08-12-2011
  • beovision avant vcr 28" type 8133

    Hi can anyone help me with a problem that i have with my avant please, the problem is that no matter howmany attempts i have made to programme the motorized stand it will not turn to position on switch on, it responds to the remote to turn ok however when i switch off the stand rotates to a memorized...
    Posted to The Workbench (Forum) by Maurice on 09-04-2009
  • Re: Workshop MX3500 MX5500 LX5500 How to repair and test this TV , common faults

    Hi Die_Bogener I wonder if you may be able to shed a little light on a fault i have on my beovision VCR 28" type 8133. At present it's showing no sign of life at all, i have gone into the fault flow sheets from this sight the fuse on PCB 60 is ok. I am getting a supply current to the smoothing...
    Posted to The Workbench (Forum) by Maurice on 08-31-2008
  • Avant VCR circuit board compatability - Curved vs Real Flat

    Is it true that, on the 32" Avant VCRs, the only (electronic) difference between the curved and Real Flat variants is the East-West board? In other words, the CRTs have the same pin-outs, and the only difference is in the board which deals with the geometry issues. Or to put it another way, could...
    Posted to The Workbench (Forum) by deaddruid on 07-17-2008
  • 32" Avant 84/23 - which CRT does it need?

    Can anyone here tell me the part number for the Cathode Ray Tube in an 84/23 32" Avant? I want to use a CRT analyser on it, but this will be safer and easier if I can identify the part number. Therefore, what I really need is the CRT manufacturer's part number, rather than B&O's number...
    Posted to The Workbench (Forum) by deaddruid on 05-20-2008
  • Modifying an avant - building in a mac

    Hi all, I'm looking for advice on the following idea please. There is a lot of talk about integrating a mac into the system. Usually this is for movies and music stored on the mac. I have an old iBook which I was thinking of using for this purpose, and last night whilst avoiding my tax return I realised...
    Posted to The Workbench (Forum) by Eyes0pen on 01-27-2008
  • Beovision Avant 28" can not be turned on from stand-by mode

    Since a few months I’m the happy owner of a 2hand Beovision Avant 28” VCR 50Hz/MK-I/MK-II, type 8111 (yes, a pretty old one J ). The set was equipped with a new tube (as was said to me by the private person who sold the set to me). After installing the Beovision at my home, sometimes the...
    Posted to The Workbench (Forum) by Artimes on 01-23-2008
  • Avant model numbers

    My (faulty) Avant has model number 8423, but my service manual is for models 8401-8408. Before I start poking around inside the set, can someone tell me the (internal) difference between the 840x and the 8423? Thank you, Mark
    Posted to The Workbench (Forum) by deaddruid on 01-17-2008
  • New tube for Beovision Avant 28"

    Morning all... it's ten to four on a Tuesday morning, and I'm at work. This is not right. Ah well.... I may need to look in to the possibility of changing the tube on the Avant; does anyone know where to get one from, or a good place to take it to? Simon of AVA services in Coulsdon (beneath the...
    Posted to The Workbench (Forum) by Alex Barnett on 09-24-2007
Page 1 of 2 (13 items) 1 2 Next >