|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Browse Forum Posts by Tags
All Tags » Speakers ( RSS)
-
Hi everybody Has anybody made good experience with newer B&O Speakers in wet rooms? We actually have a pair of cx100's connected to a MCL2A in our laundry-room (washing machine, steam-iron, air drier), but would like to upgrade to newer speakers (passive or active). We try to keep the humidity...
-
How do I connect non-B&O speakers to the Beogram 5500 receiver? I see 2 rca plugs one R and one L. Do I need a special rca plugs? Thanks for any advice.
-
So I’m planning to build a stereo purely to play vinyl on, would any one have suggestions for great but affordable speakers from bang and Olufsen that I should get? I’ve never really dealt with the company before but my dad loves the stuff so he suggested buy off them. Things to note ; I’m...
-
Greetings, I have a pair of BeoLab Pent 3 active loudspeakers that are destined for a lakehouse in Lucerne. Over winters, the house is very cold. I have downloaded a manual (as I am not at home now), but cannot find any data on temperature limitations for storage. Can anyone point me to this info? Kind...
-
I am pretty sure I already know the answer to this but has anyone heard / done business with http://www.hyzlers.com/speakers.html I did a search and didn't find anything about them on here.
-
Hi, I wondered if anyone can advise me on the best cable to connect Red Line passive speakers to a Beosystem 8500 ? I have some original old B&O leads with fixed two pin plugs but the legnth is a bit short, alternatevly I have some massive flat heavy duty core cables that could potentially be terminated...
-
Hi all - just to let you all know i had a bit of a demo session at the Shrewsbury dealership yesterday with some speakers as looking for a bit more bass than my 6000s offer with my Avant. Opinions as follows: The Beolab 8000's were average - nothing majorly different to my 6000s in my setup. The...
-
I have been given a pair of Beolab 6000 speakers which I have attached to a Panasonic TX37LZD81 TV. I can get sound from the speakers, but I cannot adjust the loudness. What am I doing wrong? [I hope this isn't too stupid a question for you all...] Signed:dls
-
I've recently acquired a pair of BeoLab 8000s and a pair of BeoLab 6000s. Is it possible to use them with a standard stereo. My amplifier uses ordinary 2-core speaker cable - is it possible to fit appropriate terminators for the speakers, or are there convertors, that I can use to hook them up and...
-
I just recently obtained a set of Redline 140's from eBay which came with original stands. The seller disassembled the speakers from the stands, but I can't figure out for the life of me how to 'correctly' mount the speakers to the stands? In particular, I'd like to mount the speakers...
|
|
|