|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Browse Forum Posts by Tags
All Tags » Penta ( RSS)
-
Hi everyone! I'm based in Chicago and currently have the AV7000 with the BeoSound 9000, Pentas as Fronts, Beolab 4000s as rears, and a center channel with a passive speaker. I'm planning on purchasing a new 1080p flat panel to work with a Blu-ray player and Apple TV, and I'd like to accordingly...
-
I inhertited a pair of Penta 1s and I understand that the Penta 1 does not have a masterlink connection. Does the beosound 9000 (mark 3) allow for this connection and do I need special hardware? Thanks! J
-
Greetings, I have a pair of BeoLab Pent 3 active loudspeakers that are destined for a lakehouse in Lucerne. Over winters, the house is very cold. I have downloaded a manual (as I am not at home now), but cannot find any data on temperature limitations for storage. Can anyone point me to this info? Kind...
-
I’ve just completed an overhaul of my Penta MK2’s. Here’s what I’ve done to date: Refoamed mid ranges Cut off spade connectors and solder wires directly to speaker terminals Replaced electrolytic capacitors on filter boards with Audyn MKT capacitors Cut off spade terminals and...
-
I currently run a BeoCenter 9300 with a pair of Penta 1 (SL to PL adaptors) and have an odd issue. On one penta the display, amp, woofer, and tweeter seems to work just great just the midrange seems not to be working (did test sweeps to isolate midrange output to no avail). On the other the display works...
-
I have a pair of Penta MK2’s that have the all too common mid-range speaker rot. I was going to attempt to refoam them, having purchased new foam rings from a site in Holland that specialises in foam rings. Unfortunately I got ripped off by them so have no foam rings. So, my next option is to replace...
-
Ok, So Mark 2 Pentas have Powerlink and the old 4 (or 5?) connectors as well. Can I have the Powerlink cabled up to a TV and also at the same time have the older connector cabled up to say a Beomaster 5500? I suspect yes but would the speakers work with both setups??? (not at the same time obviously...
-
Dear Peter, dear ALLmany thanks for your fast reply! - An answer often brings up more questions :-)... maybe you Peter, or anyone else in this marvellous forum can easily answer them: 1. Isn^t there in the speakerlink any other information transfered to the power amp aside the 2 DIN-wires - i.e. are...
-
I now have beolab 4000's connected to my B&O avant. At the moment I'm not satisfied with the sound quality of my current B&O set. I used to have penta's (passive). Buying active penta's is not an option. My wife now wants something else in the room :-( and I like a good sound...
-
Hi , I have a Beosound 9000 with beolab 8000's connected directly with powerlink cables. i have recently connected a beolink active box and a pair of Pentas in a separate room. I cannot get the pentas to fire up whatever i try. i have set the link room to option 6 on the L.OPT. the IR module responds...
|
|
|