in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Browse Forum Posts by Tags

Showing related tags and posts for the The Workbench forum. See all tags in the site
All Tags » Penta » Beolab (RSS)
  • Beolab Penta midrange wiring

    Bonjour, This might be a simple question to some of you but, on a pair of Penta 3, I just had the midrange refoamed and now I have a doubt on the wiring. On the 4 midrange speakers, the 2 middle ones are cross-wired, but I did not mark the wires properly and now on one - is connected to -, and the other...
    Posted to The Workbench (Forum) by Alain-Olivier on 05-28-2011
  • Beolab Penta 3 dead

    Hi all, I have posted questions related to this issue in the General Forum, but I guess this is the more appropriate forum for things B&O which have died... I have now spend hours working on this Penta III amp unit and have had no luck. I began with the powerlink cables, and the BC9500 and can confidently...
    Posted to The Workbench (Forum) by stevequinn on 04-14-2008
  • Re: BeoLab Penta: Front Panel of the amplifier

    Is that the grey panel or speaker fret you're referring to? I presume it's the plastic panel... if so, you could simply use a little blue-tack! It's hardly a pristine repair but it should hold it... Good luck, Alex.
    Posted to The Workbench (Forum) by Alex Barnett on 10-03-2007
Page 1 of 1 (3 items)