Hi everyone! I'm based in Chicago and currently have the AV7000 with the BeoSound 9000, Pentas as Fronts, Beolab 4000s as rears, and a center channel with a passive speaker. I'm planning on purchasing a new 1080p flat panel to work with a Blu-ray player and Apple TV, and I'd like to accordingly...

via Engadget

I don't believe its one or the other. You could easily say they both take their design or business cues from this or that agency, designer, business, movement and so on. They each likely recognized in the other, likenesses and differences, their dharma if you will. We (the consumer) are the same...

Hi all, read several related posts on the topic of connecting a mac to Beolabs, but still not 100% sure. I currently have: BL5 connected with PL to Beosound 3000; I play MacBook Pro (MB) lossless audio via MB-audio-out and jack-to-AUX cable connected to AUX input of BS3000. Works fine. No obvious sound...

The setup is very easy.. You need the latest firmware update on the BS5 Set your BS5 to "audiomaster" yes Set up an " Apple airport express" to your wireless network, and that is VERY easy! Just follow the instructions that comes with the airport.. Buy an " UCA-222 U-CONTROL...

I have a BeoVision 5 which I'm told is losely based on the Avant chassis and it works for me. It is likely the STB controller is similar. 1) That item looks like it will work. But it is not necessary if you are happy to either hack your ATV or install bought software! I use mine plugged in directly...

[quote user="StUrrock"] As a general rule of thumb if your BVIS 7-32" is running software lower than 7.0, you will need the scalar panel upgrading in order to have the hi-def sockets live!! Merry Christmas StUrrock [/quote] Sorry to dig up a topic as old as this. I am (was) about to purchase...

hi jarnim Did you ever get a solution to this problem? I have exactly the same problem connecting Apple TV to a Beovision 7-32. I get a picture through HDMI>DVI and sound coming out of the Apple TV into an active speaker through RCA connectors. No matter what I try I cannot get sound into the Beovision...

Hi, I've a Beolab 3 connected directly to Macbook Pro's headphone output (using cable converter) and if Beolab3 is on and if I unplug the cable from the laptop then it will make a crackling sound. I assume this is not good for the speakers? (I usually have to unplug the Beolab3 before I unplug...

Hello all, I’m new here and this is my first post. I share with you some kind of fascination for B&O products and philosophy although i do not always adhere to B&O ultra elitist strategy. Nor do i support the B&O’s inertia and isolation in a rapidly changing digital world. Like...