The Beo5 & Beo6 Remote Forum

Re: Beo5: Balance and Fade functions?

Santiago — Wed, 28 Nov 2007 09:50:55 GMT

Found it!!!!

This "Balance..." command is only present for the BV7-40 MKI models !!!

I've added it, and now is working perfectly well with my avant

Very frustating indeed all those little software glitchs

Thank you very much Quim for your precious help

PD: this part is specially adressed to my friend Andy (who has avant+beo5 setup) now you know too how solve this "balance upgrade" (same as the "format upgrade") in the beo5 configuration

Re: Beo5: Balance and Fade functions?

Santiago — Wed, 28 Nov 2007 09:35:27 GMT

Quim43:
I'm sure you will find it in BV7 configuration.

No success !

I've added a BV7 MKIII but there is not a Balance button in the speaker screen... only a new key named "Optimize"

Re: Beo5: Balance and Fade functions?

Quim43 — Wed, 28 Nov 2007 09:24:20 GMT

Hi Santiago

I'm sure you will find it in BV7 configuration. If not, i can send to you all IR Commands with all buttons I have in my configuration.

Regards

Quim

Re: Beo5: Balance and Fade functions?

Santiago — Wed, 28 Nov 2007 09:13:37 GMT

Quim43:
Hi Santiago
In the screen, when you touch Speakers, you get all modes you can change (Speakers 1, Speakers 2, etc...). In the same screen or submenú, you have the Balance button. After you touch on Balance button, you will get 2 arrows for Fade (Front-Rear) and Right-Left for balance. Maybe your Balance button is hidden and you have to show it.
Regards
Quim

Hello Quim

I have not that "Balance" button and it is not hide !!! (of course neither the arrows inside) but only the 5 speaker "modes"

I've search for it but not found ...

I think I'm going to add AGAIN a fictive BV7 to see if this command is present there

Re: Beo5: Balance and Fade functions?

Quim43 — Wed, 28 Nov 2007 08:47:21 GMT

Hi Santiago

In the screen, when you touch Speakers, you get all modes you can change (Speakers 1, Speakers 2, etc...). In the same screen or submenú, you have the Balance button. After you touch on Balance button, you will get 2 arrows for Fade (Front-Rear) and Right-Left for balance. Maybe your Balance button is hidden and you have to show it.

Regards

Quim

Beo5: Balance and Fade functions?

Santiago — Wed, 28 Nov 2007 06:51:09 GMT

Hello everyone,

I need HELP AGAIN! I've troubles to configure my beo5

It's a similar problem I had with the picture formats, about using the 4 arrows control inside a command

I cannot do work BALANCE or FADE options with my beo5 (hard keys or screen keys)

With Beo4 I use the 4 key arrows inside the SPEAKER command to control those options... but after several attempts I don't know how configure the correct IR code keys in Beo5 to achieve these functions

Thanks in advance for any help.