The Beo5 & Beo6 Remote Forum

Re: Beo5 Audio Command

Santiago — Tue, 27 Nov 2007 04:56:08 GMT

Oh yes!

Now I've understood perfectly well... and you're right Quim.

Enjoy!

Re: Beo5 Audio Command

Quim43 — Tue, 27 Nov 2007 01:33:05 GMT

Hi Santiago

I knew I didn't explain well. Sound command is to change languages in a dual channel, the same as you, I meant IR Command is Turn, when you are in the Edit Tab in the configuration software, something like this: 0:000:TV:TURN.

Hope now it's more clear.

Regards

Quim

Re: Beo5 Audio Command

Santiago — Mon, 26 Nov 2007 15:39:26 GMT

the Beo5 IR Command: "Sound" changes Speakers Mode. The IR Command to change languages on TV with Beo5 is "Turn".

That's very curious !!!

I think all it's due you have a BV7 and I have an Avant, because in my case Beo5 works exactly as my Beo4:

Beo5 "Sound" command change languages in tv dual channels, and "Speaker" the speaker mode...

In my beo5 the "Turn" command doesn't exist !

Anyway, the only important thing is that now everything works for you Quim...

Regards.

Re: Beo5 Audio Command

Quim43 — Mon, 26 Nov 2007 13:45:54 GMT

It's fixed. It was a mistake due to language in my Beo5. In my Beo4, i have to send Sound to change languages, so i supposed it was the same with the Beo5, but the Beo5 IR Command: "Sound" changes Speakers Mode. The IR Command to change languages on TV with Beo5 is "Turn".

I don't know if i explained it correctly, but, at least, now it works fine.

Quim

Re: Beo5 Audio Command

Santiago — Mon, 26 Nov 2007 06:54:32 GMT

Quim43:
i don't talk about to change languages of any DVB, just of analogue TV.

Hello Quim,
in my case (Beo5+avant) the "sound" command works well changing between languages with analogue TV, hope this help.

Good luck.

Re: Beo5 Audio Command

Quim43 — Mon, 26 Nov 2007 01:36:37 GMT

Thanks, Andy and Santiago

I use a BV7 Mk I, with STB controller, but i don't talk about to change languages of any DVB, just of analogic TV. When i click Sound, TV asks me about to change Speakers mode. If i do the same with my Beo4, TV asks me to change between Mono, mono-1, estereo, etc.

I will do more tests.

Quim

Re: Beo5 Audio Command

Santiago — Sun, 25 Nov 2007 19:16:13 GMT

Andy is right Quim,

Beo5 "Sound" command works fine for me, and I have no problems to switch the tv audio language in the avant.

To change among the different speaker modes I use the beo5 "Speaker..." command.

Re: Beo5 Audio Command

Jandyt — Sun, 25 Nov 2007 18:48:06 GMT

Hola, Quim de Tarragona.
I'm not sure, but I think it may depend on which TV and/or set top box you are using.

Andy T.

Beo5 Audio Command

Quim43 — Sun, 25 Nov 2007 16:49:50 GMT

Does anyone know what command i have to use to switch between diferent languages in a TV program?

I used Sound in Beo4, but i tried Sound in Beo5 and it is used to change between speakers system.

Thanks

Quim