The Beo5 & Beo6 Remote Forum

Re: Picture format changing up/down arrows

Santiago — Wed, 28 Nov 2007 18:32:29 GMT

My beo5 counter shows: Config. Download (times): 134!!!

to be continued...

Re: Picture format changing up/down arrows

Jandyt — Wed, 28 Nov 2007 18:28:47 GMT

Cheers my friend. Time for another little play I think.
In my Client file I am saving lots of different configurations by adding a letter to my serial number.
That way, I can revert to a previously stored config.

Andy T.

Re: Picture format changing up/down arrows

Santiago — Wed, 28 Nov 2007 18:20:35 GMT

Hi Andy, I had explained that here

and here specifically for you!!

Read the two last lines (PD)...

Re: Picture format changing up/down arrows

Jandyt — Wed, 28 Nov 2007 17:19:28 GMT

I have to tell mine that I have an Ouverture or I won't get tape commands for my Beosystem 7000.
I wonder if it's something to do with that. I'll try again when I get the time.

Andy T.

Re: Picture format changing up/down arrows

stefan — Wed, 28 Nov 2007 17:09:59 GMT

Hi Andy, I have a BV7 MK II and audiomaster is BS 9000. Did you try to get the "Picture"-button? I think, it did work for Santiago... (?)

Stefan

Re: Picture format changing up/down arrows

Jandyt — Wed, 28 Nov 2007 16:39:58 GMT

Stefan, Which model of BV7 should be used? I tried it before with the picture format question but couldn't get what you described.

Andy T.

Re: Picture format changing up/down arrows

stefan — Wed, 28 Nov 2007 15:57:01 GMT

Choosing BV7 as product will create a button "Speaker..." incl. submenu with mode 1 - 5 and a button "Balance". Pressing "Balance" will open a submenu with 4 buttons: Arrow up/down and arrow left/right. These should control the functions you are looking for.

Good Luck.

Stefan

Re: Picture format changing up/down arrows

Santiago — Wed, 28 Nov 2007 06:39:24 GMT

Hello everyone,

I need HELP AGAIN! I've troubles to configure my beo5

It's a similar problem than before, about using the 4 arrows control inside a command

I cannot do work BALANCE or FADE options with my beo5 (hard keys or screen keys)

With Beo4 I use the 4 key arrows inside the SPEAKER command to control those options... but after several attempts I don't know how configure the correct IR code keys in Beo5 to achieve these functions

Thanks in advance for any help.

Re: Picture format changing up/down arrows

Santiago — Mon, 19 Nov 2007 04:35:51 GMT

stefan:
I have borrowed one from my dealer and programmed 2 soft keys: 0:000:VTR:CNTL_WIND and....REWIND (yellow and green) with arrows left/right. It`s exactly what you did. Should also work with hard keys..(?)...Maybe you could try to change the adress: 0:000:TV:CNTRL_WIND ....REWIND..but I don`t really know. Good Luck Stefan

No luck here Stefan

I tried long time ago the on-screen buttons and those worked well, but I want to use the Beo5 "<<" ">>" hard keys for a quick "blind" daily use.

Unfortunately I've tried all the combinations using "TV""VTR""WIND/REWIND""CNTL_WIND/REWIND"...with no success at all

It seems like if those two hard keys inside the VTR (HDR2) section doesn't admit any "reconfiguration" via software and always work as "previous""next" commands
However, inside the CD section this software reconfiguration works very well and the beo5 "<<"">>" hard keys function now as "rewind""wind" for the BS9000 (no more as "previous""next")

Regards.

Re: Picture format changing up/down arrows

stefan — Sun, 18 Nov 2007 15:21:58 GMT

Sorry, I have no HDR2. But I have borrowed one from my dealer and programmed 2 soft keys: 0:000:VTR:CNTL_WIND and....REWIND (yellow and green) with arrows left/right. It`s exactly what you did. Should also work with hard keys..(?).I have some hard keys reconfigured using a STB including macros. Works great. Maybe you could try to change the adress: 0:000:TV:CNTRL_WIND ....REWIND..but I don`t really know. Good Luck Stefan

Re: Picture format changing up/down arrows

Jandyt — Sun, 18 Nov 2007 14:19:10 GMT

Welcome to the forum BeoBoy Lit.
Try not to be too shy.

Andy T.

Re: Picture format changing up/down arrows

BeoBoyLit — Sun, 18 Nov 2007 14:05:06 GMT

Re: Picture format changing up/down arrows

Santiago — Sun, 18 Nov 2007 12:52:19 GMT

Stefan you've solved 2 of the 3 problems I had with my beo5 !!!!!!

The third problem (relating some Beo5 hard keys) is explained with detail from here on

Do you have any idea?

Thank you in advance.

Re: Picture format changing up/down arrows

Santiago — Sun, 18 Nov 2007 12:38:15 GMT

stefan:
Santiago, tell the configuration tool you have a BV 7. This will create a "Picture"-button including submenu with all the buttons mentionened before. Copy this button into your configuration and hopefully it works like you want it - good luck. Stefan

Stefan, you're a GENIUS !!

It WORKS!!!!

Andyyyy !!!!!! do it, and the picture format problem will be definitely solved.

The BV7 MKI picture format screen has 5 more buttons than the avant one...and it has two "on-screen arrows" which does the work I was searching.

Now all this post can be labelled as "SOLVED"

Once again Stefan: THANK YOU VERY MUCH for your precious help

Re: Picture format changing up/down arrows

stefan — Sun, 18 Nov 2007 09:00:09 GMT

Thanks for the kind words! Yes, Andy, sure, you`re right. This works also vice versa. If you want to listen to the radio while watching TV it`s: 0:000:TV:RADIO. But I`m afraid this not the answer to the picture-format question. When I look at all the picture-buttons (p.mute, variation, optimise, arro down/up, standard, widescreen....) they all show me "2" - just the number 2 (!??!). It sounds a bit cryptic (right word?) but they all work. Maybe this is a more complex question that needs a more complex answer, what do you think, Keith? I would be highly interested in a solution. But meanwhile maybe this helps: Santiago, tell the configuration tool you have a BV 7. This will create a "Picture"-button including submenu with all the buttons mentionened before. Copy this button into your configuration and hopefully it works like you want it - good luck. Stefan