The Beo5 & Beo6 Remote Forum

Re: Development of a Beo5 FAQ

Santiago — Mon, 15 Oct 2007 07:42:09 GMT

jandyt:
I love my Beo5 to bits, but the weakest feature, in my opinion, is the mute.
I push on the click wheel at the bottom, between red and blue would have been better I think.
Andy T.

Agree 100% Andy.

Re: Development of a Beo5 FAQ

Keith Saunders — Mon, 15 Oct 2007 07:07:35 GMT

Andy,

You could always add a "MUTE" button on the screen for each product

Re: Development of a Beo5 FAQ

Jandyt — Mon, 15 Oct 2007 06:59:37 GMT

I love my Beo5 to bits, but the weakest feature, in my opinion, is the mute.
I push on the click wheel at the bottom, between red and blue would have been better I think.

Andy T.

Re: Development of a Beo5 FAQ

mr_anders_son — Mon, 15 Oct 2007 04:04:27 GMT

Tip to mute sound: turn the wheel fast to left and the sound mute

Re: Development of a Beo5 FAQ

Keith Saunders — Fri, 12 Oct 2007 08:30:08 GMT

The Beo5 FAQ page has been updated and you can review it HERE

Re: Development of a Beo5 FAQ

V13WNG — Sun, 07 Oct 2007 20:15:13 GMT

Interesting to see that Keith hasn't configured the software to have the most used rooms nearer the base of the screen. I have been told that this was the idea, so the user wouldn't have to move his/her thumb too far!!!!

Re: Development of a Beo5 FAQ

Yendys — Sat, 06 Oct 2007 00:03:27 GMT

Keith Saunders:
jandyt:

Looks great Keith.
Had you thought about colouring the text to make it easier to choose?

I took note of Andy's recent comments about my Beo5, so below is my new look:-

Actually i thought the original version was more B&O like. but thats the point everyones will be different. Now i wonder how you are able to change things so easily?? Or do you live next door to a B&O store...

Re: Development of a Beo5 FAQ

Roger — Thu, 04 Oct 2007 01:00:40 GMT

Another SW error:

V.SAT should read V_SAT in the edit-section for IR-codes. Please correct unless you have the latest SW downloaded to the Beo5 by your dealer.

Roger

Re: Development of a Beo5 FAQ

Jandyt — Wed, 03 Oct 2007 12:54:16 GMT

Ooh, I like that Keith, I am going to have to outdo you!
Now, I need a bigger house......

Andy T.

Re: Development of a Beo5 FAQ

Keith Saunders — Wed, 03 Oct 2007 08:02:36 GMT

jandyt:

Looks great Keith.
Had you thought about colouring the text to make it easier to choose?

I took note of Andy's recent comments about my Beo5, so below is my new look:-

Re: Development of a Beo5 FAQ

Keith Saunders — Wed, 03 Oct 2007 01:09:34 GMT

Roger,

Thank you for your two entries for the FAQ, the updates and other FAQ's can be found HERE

Re: Development of a Beo5 FAQ

Roger — Wed, 03 Oct 2007 00:58:49 GMT

Q: My Beo5 works great, but I can not get it to operate my VCR. Why?

A: There was an error in the setup program for the IR-codes. V TAPE reads "V-TAPE", but it should read "V_TAPE" in the IR-table. You and your dealer should locate this IR-code in the setup program and correct it to "V_TAPE".

Re: Development of a Beo5 FAQ

Roger — Wed, 03 Oct 2007 00:55:10 GMT

Q: I have charged the Beo5 over night, but it only lasts a few minutes. What is wrong?

A: Your Beo5 needs an SW update. Until this is carried out, do the folowing: Place the Beo5 in the charger and press the center button for at least 3 seconds to power it down. The display should read "charging". Leave it there for 4-5 hours.

Re: Development of a Beo5 FAQ

Keith Saunders — Tue, 02 Oct 2007 15:28:46 GMT

Please find the start of the Beo5 FAQ HERE

Re: Development of a Beo5 FAQ

Roger — Tue, 02 Oct 2007 00:40:20 GMT

Q: The PC can not recognise the Beo5 when connected - what shall I do?

A: Leave the charger plugged into the USB socket, remove the Beo5 from charger and turn the Beo5 off (press center button for at least 3 seconds). Then replace the Beo5 in charger, it will then power on and the PC should recognise it.