The Beo5 & Beo6 Remote Forum

Re: No valid configuration!

nico vercammen — Sat, 21 Jan 2012 05:57:09 GMT

The beo6 is brand new ! only 1 week old, worked OK for 1 week.
I did several modifications to the config during that week

The strange thing is that I had exactly the same problem with another beo6...
It worked for a couple of days, and than exactly the same problem after writing new config ...
So I went back to the dealer and received a new one (they said it was defect, which was also my feeling)
But now I can not believe it is a hardware malfunction, not 2 times with exactly the same result ...
I have the impression there is somewhere a bug ?

I didn't do any strange things, the only possibility is that it was maybe not fully charged because I was doing some testing.
but than it should come back to life after a recharge ...

nico

Re: No valid configuration!

Chris — Sat, 21 Jan 2012 05:47:55 GMT

is does sound quite strange although I am new to the Beo5 - how old is it?

Re: No valid configuration!

nico vercammen — Sat, 21 Jan 2012 03:57:42 GMT

thanks, but why would i need that version ?
anyway i have both 4.11 and 5.12 running on differenet systems and the problem is identical, beo6 is not recognised (it was in the beginning, I have also a beo5 wich is recognised without any problem), so there should be no problem on the computer.

the beo6 was during the whole night on the charger but no difference ...
no text on the display, only backlight on when on the charger...
Should it de-charge / charge longer than 12 hours ?
Why is the backlight on when on the charger ?

nico

Re: No valid configuration!

Chris — Fri, 20 Jan 2012 17:36:12 GMT

I've got config 4.11 - if your on Skype I can send the file across - its 114mb but i'm on a quick connection if you are. If you want to email me via forum I will add you to Skype and I can send it across.

Re: No valid configuration!

nico vercammen — Fri, 20 Jan 2012 16:38:52 GMT

I have similar (strange) problems with beo6
I tried to upload a new configuration and now it does not respond anymore ...
It worked for a week, but when updating with some minor changes if goes completely off line
There is no text showing on the display, only the backlight goes on for a fews seconds.
As soon as i put it on the charger the backlight goes on, and it stays like that for hours.
The PC does not recognise the beo6 anymore.
It gives the impression the internal software is wiped away ...
I can try a long reset and put it on the charger again for a whole night but i do not have not a good feeling ..
Any ideas what could go wrong ?

nico

Re: No valid configuration!

Keith Saunders — Thu, 29 Dec 2011 14:38:56 GMT

You need to charge it up on the charger and then download a configuration again.

Re: No valid configuration!

chucky — Thu, 29 Dec 2011 13:12:29 GMT

Thanks Leith powered it down for 30 seconds and put it on the wall charger. It came immidiatly after putting the plug, not usb, with the same error message.

Do i need to charge it now and setup again or am I stlli doing something wrong. ( i did not now it would empty the battery as wel)

Thanks

Chucky

Re: No valid configuration!

Keith Saunders — Wed, 28 Dec 2011 12:10:18 GMT

Generally speaking if you get the "No Valid Configuration" message you need to perform a hard reset by pressing and holding the centre button on the Beo6 for 30 seconds. When you release your finger place it on the base connected to the charger (not the USB) as a full reset also makes the battery empty.

When the battery is fully charged, try again..

Re: No valid configuration!

chucky — Tue, 27 Dec 2011 06:22:19 GMT

No I got a wall charger as wrl plugged in the mains.

Thanks anyway

Re: No valid configuration!

Stoobietoo — Tue, 27 Dec 2011 06:09:05 GMT

chucky:
I have recharched it for more then 2 days, I am affraid the firmware-update didn't succeed becaused windows killed tthe usb connection while updating..

This may seem obvious but did you recharge it on the charger plugged into the mains power socket or on the USB on the computer? on my Beo5 I had to charge on the mains because even leaving it plugged into the USB for a day didn't seem to charge it enough but an hour on the mains and I was able to get it to work.

Stoobie

Re: No valid configuration!

chucky — Tue, 27 Dec 2011 00:14:12 GMT

Did you try to transmit the config. again?

Stefan

I have tried sending it about 30 times... If this what you mean. Downgraded to 4.12 nothing getting desperate.

Re: No valid configuration!

chucky — Tue, 27 Dec 2011 00:12:15 GMT

Hi stefan. I have put in just a Beovision in one room nothing more because I first want to getting in working order. I powerd it down and up. The software sees my beo 6 but when it has passed the test it wants to write to the beo 6 it justs lits up and then.. Nothing. Lost usb connection and windows doesn't recognises it anymore. Installed the .inf software as well.

Re: No valid configuration!

stefan — Mon, 26 Dec 2011 13:43:57 GMT

Did you try to power Beo6 completely off and on again?

Does the CT 5.12 detect your Beo6?

Did you control the configuration before transmitting it to your Beo6?

Did you try to transmit the config. again?

Stefan

Re: No valid configuration!

chucky — Mon, 26 Dec 2011 02:25:47 GMT

I have recharched it for more then 2 days, I am affraid the firmware-update didn't succeed becaused windows killed tthe usb connection while updating..

Re: No valid configuration!

beojeff — Sun, 25 Dec 2011 08:14:17 GMT

I was having a similar problem. However, I found something odd to happen: After getting the "invalid configuration" message, I would charge the Beo6 for about an hour. Then, when I would reconnect the Beo6 to the computer via USB, the Beo6 would turn on and show that it had, indeed, loaded the full configuration and functioned perfectly.